BISSELL Stain Pro 6 | Carpet Cleaner With HeatWave Technology and 6 Rows Of Rotating Brushes | 20096

Product Information

This includes hard floors, upholstery, and carpets. Also, stained surfaces must be treated before cleaning. The machine is easy to use with a lightweight design and mobility wheels for easy maneuverability. It also includes a removable nozzle for easy cleaning and maintenance. The Bissell StainPro 6 is energy-efficient with low noise levels during operation. The Bissell StainPro 6 is a carpet cleaner designed to remove tough stains and deep dirt from carpets, rugs and upholstery. This machine features a powerful suction motor and a deep-cleaning brush system that work together to remove stains and soil from carpet fibers. It has a large water tank capacity of up to six liters and a continuous cleaning mode for large cleaning tasks.

However, being such a sophisticated device requires a high maintenance degree, either from home or by visiting authorized service centers. As is the case with all carpet shampooers, the twin brushes did pull up some loose carpet fibres. However, the floating brush bar design meant this was in no way excessive. We’d be happy to use the Bissell on our carpets every few months. Bissell’s long-standing experience in carpet cleaning shines through in the design and performance of the StainPro 10. It delivers excellent results, thanks to the dual brush bar action and high-performance cleaning fluids, and the solid suction power leaves carpets just damp rather than wet.Stretching the cleaning out to a full minute, the stain was all but gone. Had we carried on for another pass or two, we suspect it would have been removed completely. The tank itself isn’t the most obvious to fill – none of its ports are labelled – so you’ll need to resort to the manual. That recommends two of the supplied 2.5fl oz (74ml) measuring cups of cleaning solution per tank. Since the bladder is flexible, there’s no obvious fill-up line; we just topped it up with warm water and left enough room for the solution. Bissell StainPro 10 – Accessories The device can heat and maintain the water temperature in the tank at about 25 0C throughout the cleaning process.

In case the machine cleans the carpet and leaves behind streaks, the following troubleshooting steps could help you fix the problem.The Bissell StainPro 6 does come with some hady tools. I’ve already mentioned the flexible hose a few times and how useful it is. There is also a crevice tool, and this can help you to reach difficult corners in your home or car, providing greater versatility. This product is another effective carpet cleaner from a reliable manufacturer of carpet cleaners – Bissell. The StainPro 6 is designed to destroy and remove dirt from your carpet efficiently and thoroughly. To further boost its power to eliminate stains and spots, it is powered by constant heat. The main issue this carpet cleaner has is the weight; everything else is superb. It is a heavy machine, and this does make carrying it up the stairs a bit of a chore, but it’s worth it for the results that it produces. The machine should once again be run over the carpet only with water. These movements should be performed in small and overlapping strokes.

Bissell offers an epic range of carpet-cleaning fluids, and we’ve been a fan of the company’s cleaning chemicals for a long time. You get two 236ml sample bottles here, Professional and Deep Clean + Oxy. The professional is the standard detergent, while the latter adds active oxygen technology to help remove stains. Room Preparation. The area to be cleaned has to be thoroughly vacuumed to prevent machine clogging. The two tanks in the machine should be pulled out, separated, and set aside. The nozzle is then removed by undoing the two screws holding it in place. The hose is flexible, if not stretchy, and we had no problem getting a good way up our stairs. The connection to the cleaner is low, so there’s no danger of toppling the cleaner. It’s also transparent, so you can see the dirty liquid shooting up the tube. That novelty wears off when the hose looks filthy after a few uses. Test the machine’s priming ability. After waiting for a minute, turn on the machine and press the trigger to dispense the cleaning solution.Billed as a carpet and upholstery ‘deep cleaner’, Bissell’s StainPro 10 is a serious piece of kit. The form is a full-size carpet shampooer with an 800W motor and on-board stain tool. The main floorhead boasts twin brush bars with 10 rows of bristles and heated cleaning. It has one of the largest clean water tanks we’ve seen at just shy of 5 litres. Of course, you also have the six rows of brushes to help agitate the carpets and bring up the dirt that was hiding from you. Additionally, the side brushes are some of the best on the market, and certainly the highest ranked from Bissell. The StainPro 10’s hose is permanently attached to the body. When not in use you wind it up tidily around its rear hanger; it rests in a dedicated clip. A standard brush/vacuum tool is supplied for spots and upholstery. There’s also a crevice tool but, frankly, we have no idea what it’s for. Still, if we find a use for it then we’ll update the review. The CleanShot Pre-Treater is the perfect tool for removing tough dried-on stains. Just spray the stain that you need to remove, let it soak for a few minutes, then remove using the carpet cleaner. It’s thorough when it washes your floors, and the heat technology that has been implemented makes a world of difference to the process.