Boston Advance Cleaner, Leaves Lenses Clean, Ready for Disinfection and Conditioning, for Rigid Gas Permeable (RGP) and Hard Contact Lenses, 30 ml

Product Information

The cleaning solution is visibily tinted so you can see your cleaner has been thoroughly rinsed off. Your lenses are now ready Visibily Tinted For Improved Rinsing, Cleans And Disinfects, Removes Stubborn Deposits And Debris Warning or Restrictions Yes, I would like to receive the latest coupons, news and updates from Bausch + Lomb. Please remove me from Bausch+Lomb mailing list. These solutions are designed for overnight storage. They improve RGP lens wettability by hydrating the surface of the lens and improving it's ability to adhere to your tear film for best vision stability and on-eye comfort. They also have disinfectant abilities to prevent contamination of the lenses while being stored overnight or over several days.

To use, wash hands and rub both sides of the lenses carefully with 2 to 4 drops in the palm of your hand for 20 seconds. Then, Keeping lenses clean of dirt and debris is one of the most fundamental tasks that lens wearers face, and it can be hard work. But, with Boston Advance Cleaner from Bausch and Lomb, it’s firmly within your grasp.Place lenses in lens case and fill with fresh Boston Advance Conditioning Solution. Soak the lenses for at least 4 hours (or overnight) before wearing. Make sure you thoroughly wash and dry your hands before removing the lenses from your eyes or the lens case, then complete these simple steps. Contains A Patented Multi-Polymer Comfort System To Cushion The Lens Upon Insertion. It Has A Dual Preservative System Providing Maximum Disinfection To Kill Mico-Organisms. Warning or Restrictions Boston Original Conditioning Solution: For conditioning and disinfecting, soak lenses for at least 4 hours. This is a tried and true formula is getting harder to find and has been largely replaced in favor of the Boston Advance Conditioning Solution below.

Before handling lenses, wash your hands. 2. Rub both sides of the lenses carefully with 2 to 4 drops of Boston ADVANCE Cleaner in the palm of your hand for 20 seconds. Rinse each side of the lens thoroughly for at least 5 seconds or as needed to remove all traces of the cleaner (tinted white) with a saline solution such as Bausch + Lomb saline indicated for the care of gas permeable lenses. Recyclable Before handling lenses, wash your hands. 2.Clean your lenses following the directions of your lens cleaner. Place each lens in its storage case and cover it with a fresh supply of Boston Advance Conditioning Solution. Allow the lenses to soak for at least 4 hours for proper disinfection before placing them in the eye. When removing the lenses from thecase, reapply fresh solution prior to insertion. RecyclableBoston ADVANCE® Conditioning Solution uses an optimized preservative system to minimize ocular irritation, while effectively killing harmful micro-organisms when used with Boston ADVANCE® Cleaner Also of note is that RGP lenses with Tangible Hydra-PEG coatings should NOT be cleaned with abrasive daily cleaners like Boston Advance due to the risk of damaging the surface coating. Boston ADVANCE® Cleaner loosens and removes accumulated film, stubborn deposits and debris for more comfortable lens wear Boston Advance Cleaner from Bausch and Lomb makes it easier than ever to keep gas permeable lenses clean and clear throughout the day. Not only are clean lenses healthier for your eyes, but they provide an extra level of comfort as long as you are wearing your lenses.

Lobob ESC: This surfactant based cleaner is self-preserved and contains no abrasive particles that could change the shape or design of the RGP lens over time. After a digital rub, it must be rinsed off thoroughly like Boston Advance Cleaner above. Discard the solution from the lens case and immediately give the inside of the lens case a thorough clean with a fresh, sterile disinfecting solution.Alkyl sulphate surfactant (8,0 % p/v), Sodium chloride, Sodium phosphate, non ionic alcohol surfactant, silica gel suspension; with titanium dioxide. Featuring a visibility tint, which allows you to see that the cleaner has been rinsed from the lens, Boston Advance Cleaner offers a convenient and easy-to-use solution. It should be used as part of a two-step process with Boston Advance Conditioning Solution, which should be used to store lenses overnight, adding extra moisture to your lenses and ridding them of any excess cleaner.