276°
Posted 20 hours ago

SGTKJSJS M.2 Screw Kit,NVMe Screw m.2 SSD Mounting Kit

£4.85£9.70Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Yes, this is a possibility, but one that should be done with utmost care, if you don’t want to loose your data or fry you parts mid-session.

So there’s a non-zero chance that there might be a screw that could fit an M.2 standoff in your collection.

So you don’t need to screw them in, but it’s such a simple and easy safety measure, there’s no point not doing it. If you just want to make sure the drive stays where you put it and want something that’s lowkey. This is an option. Some motherboards don’t have standoffs. Some do, and you need to install them. Some come with them pre-installed. And so on. Get some actual M.2 screws and do it right. But in the meantime… Look for Old Small Screws in Your Home

As the name implies, they’re screws designated to screw in M.2 drives into your motherboard. And they can be a right nuisance at times because they have a tendency to magically disappear when you actually need them. So if you want to buy some screws for M.2 standoffs, what you need are M2 screws. Specifically, you want to get the following M.2 screw size: “ M2x3mm“. MacGyver it (Not Recommended) Screwing it in is just a precaution to make sure that the drive doesn’t get dislodged if you accidentally bump into your PC or something. It’ll hold your drive down just fine, to the point where you don’t even need to bother with the M.2 screws when you do find them. Though the drives might come loose If you move your PC around a lot. Skip the M.2 Screw entirely

4 Comments

The original SATA protocol was designed to maximize the performance of platter (physical spinning) hard drives. With the proliferation of SSD drives, the SATA storage management protocol has become a limiting factor. The NVMe (Non-Volatile Memory) protocol has been designed for solid state drives and uses the PCIe bus for optimal performance. An M.2 drive may support SATA or PCIe/NVMe but not both. Depending on the drive, and what the computer can support, not all M.2 drives work in all computers.

M.2 storage devices are classified numerically based on performance. The higher the Class, the faster the overall performance: M2 screws are available in a wide range of materials including steel, stainless steel, brass, nylon, aluminium and titanium as well as exotic materials including Duplex, Super Duplex and Inconel. M.2 Drives don’t really need to be screwed down flat onto the motherboard, they temporarily (!) work perfectly fine just hovering at an angle of 30°.

M3X3 screw(most computers include these. These secure the Y1WJX M.2 drive carrier, or a 2.5" drive into 745TM)

Now, sometimes, we just have to wing it and find a way to make it work. You’re missing that M.2 screw but you still want to finish setting up your PC now, and not in 3 days when the new screw arrives, right?Just make sure you don’t destroy anything by trying to jam in a screw that’s way too big. Tape the M.2 Drive Down M.2 screws, a relatively new addition to the menagerie of things that you have to screw into your motherboard.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment