TP-Link AX1800 Wireless Dual Band Ceiling Mount Access Point, Wi-Fi 6 , Gbps Ethernet port support 802.3at PoE+, Ultra-High Performing Enterprise Wireless for High-Density Environments(EAP620 HD)

Product Information

IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, IEEE 802.3at, IEEE 802.11ac, IEEE 802.11ax, Wi-Fi CERTIFIED 6 Centralized Management: Cloud access and Omada app for ultra convenience and easy management of multiple devices from a single interface. Integrated into Omada SDN: Zero-Touch Provisioning (ZTP) §, Centralized Cloud Management, and Intelligent Monitoring.

During testing, I noticed that in the 5 GHz band, the access point chooses a frequency in the 5.2 GHz band, reluctantly climbing higher. Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product. The Omada EAP620 HD model of the AX1800 class characterizes the mainstream of the Wi-Fi 6 standard for those clients who care not about the bandwidth of the interface, but the connection of clients using a new technology in a busy radio environment using OFMDA, 1024-QAM, BSS Coloring, Beamforming, Band Steering, Seamless Roaming and Cloud Management. This AP has 4 spatial streams, allowing for an aggregate data rate of 2.4 and 5 GHz in the region of 1775 Mbps. Design and key characteristics of the access point Zero-Touch Provisioning and Auto Channel Selection and Power Adjustment require the use of Omada Cloud-Based Controller. Note thatEAP620 HD v1.0 doesn't support Omada Cloud-Based Controller.Please go to https://www.tp-link.com/en/omada-cloud-based-controller/product-list/ to confirm which models are compatible with Omada Cloud-Based Controller. This firmware fully adapts the Omada SDN Controller v5 but only compatible with Omada Controller v4.1.5 or above.Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS) 09-27-2022 55814 What should I do when the Omada Software Controller (V4) fails to discover the devices? 11-23-2021 87420 Despite the fact that in general TP-Link EAP620 HD looks just revolutionary, you should be aware that by business standards this is an entry-level access point, created exclusively for distributing a wireless network to clients, of which there can be up to 512 devices. There is no WDS, no PPoE client, and no routing tinsel. That is, the access point cannot act as a client of Wi-Fi networks and connect to the Internet itself. It cannot act as a controller for other access points and configure MESH and 802.11 k/r without a third-party controller. IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

meer capaciteit verwijst naar de toename van de gemiddelde doorvoer in omgevingen met een hoge dichtheid in vergelijking tot een standaard 4×4 11ac access point. Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms. The EAP620 HD is designed for both ceiling and wall installation using a lightweight snap-on mount. All Wi-Fi devices have an increased appetite for electricity, and this model is no exception. The power consumption of TP-Link EA P620 HD is 12-13 W, so for PoE connection you need a switch or injector with 802.3at (PoE +) support. But now there are no problems with this - almost any PoE switch released over the past 3 years has support for "one plus", that is PoE +, but for uniformity of management and service, it is better to consider the TP-Link Omada series switches.

Advanced Wi-Fi Speed with 4 Spatial Streams

You may come across this model as the EAP620 HD, although somewhere AX1800 is added to the name, an acronym for 802.11ax support up to 1.75 Gbps. In both cases, it is the same access point, but the Omada inscription does not indicate the name of the model or series, but the support of management via the cloud. That is, to monitor or configure a large fleet of WLAN devices, you do not need to buy a WLAN controller, especially if you do not plan to overload your network with numerous QoS rules or anti-flood protection. What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller? 04-20-2023 16194

It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade. The very same motherboard of the access point does not exceed the size of the same standard 802.11ac. TP-Link EAP620 HD uses 4 antennas, two with horizontal polarization and two with vertical polarization. For the 2.4 GHz band, the gain is 5 dBi, and for 5 GHz it is 6 dBI, which is a very good indicator for built-in radiators.In contrast to the narrow-beam ceiling models, there is very good horizontal coverage, so even if the EAP620 HD is hanging on a wall, the entire plane of this wall has the same good coverage as in the front, in front of the AP.

Increased Capacity refers to increase in median throughput under dense environment compared to standard 4×4 11ac access point. The Wi-Fi 6 standard is so radically different from previous generations of wireless networks that today it makes no sense to install 802.11ac equipment, and even more so - in busy networks with a large number of wireless networks, the more clients start switching to Wi-FI 6, the less busy the radio environment will be. No one doubts the benefits of OFMDA and 1024-QAM technologies, which promise to quadruple average throughput through better spectrum utilization and improvements for dense deployments. The question, as always, rests on the cost of such equipment. Today we will consider a budget version of a Wi-Fi 6 hotspot from TP-Link. A firmware update can resolve issues that the previous firmware version may have and improve its current performance. To Upgrade To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device. Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 07-07-2023 17419

Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28) Ultra-Fast WiFi 6 Speeds:Up to simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz bands totals 1775 Mbps Wi-Fi speeds. PoE+ Powered: Supports DC (adapter included), 802.3at PoE+, and Passive PoE for flexible installations Maximale draadloze signaalfrequentie op basis van specificaties van de IEEE 802.11-standaard. De werkelijke draadloze gegevensdoorvoer en het draadloos bereik kunnen niet gegarandeerd worden en variëren op basis van 1) omgevingsfactoren, met inbegrip van bouwmaterialen, fysieke objecten en obstakels, 2) netwerkomstandigheden, met inbegrip van lokale interferentie, omvang en dichtheid van het verkeer, locatie van het product, complexiteit van het netwerk en overhead, en 3) clientbeperkingen, met inbegrip van nominaal vermogen, locatie, verbinding, kwaliteit en toestand van de client.