Fliesenschneider PTC 640

Product Information

Bosch Diamond Technology ensures this is possible by offering extremely durable cutting edges. Low Friction Segments help minimize wear, increase precision up to four times ensuring clean and efficient cutting capability. Instead of building a new saw from the ground up, Bosch chose to adapt a well-liked saw design for the TC10 that had been introduced several years ago and is still sold in the US and Europe under different brand names. Manufactured in concert with a partner tool company in a co-owned factory, Bosch has had a hand in the making of this saw since its inception.

A saw’s table really is the heart of a tile saw. Its operation determines the accuracy and ease of use of the saw more than any other single component. The action of the Bosch table is very smooth which makes for clean, accurate cutting. It allows a maximum cut of 13-3/16 inches to the left of the blade (the clearance between the blade and saw head support arm). When using the fence stop to set your cut, however, its width only allows a maximum setting of 7-1/4 inches to the left of the blade. And if we got a chance to redesign the saw we would consider adding a second, closer position to bolt the saw head to for cutting 12-inch and smaller tiles. The reach of 30 inches or so felt like a stretch when cutting smaller tiles that don’t require long table travel. Developed in conjunction with tilers to sit comfortably in the hand due to its slim ergonomic grip; powerful 720 W motor combined with the transparent protective guard ensures a good view of the work surface making for precise and clean results in all common cutting and drilling applications. Scottish Highlands & Islands postcodes: AB, FK, HS, IV, KA, KW, PA, PH, ZE, LL58-LL78, IM, TR, PO30-41To further the design of the TC 10 beyond previous versions and make it truly their own, Bosch made a few modifications intended to serve their pro users better. They ditched the laser line guide and LED work light mounted under the motor housing and tweaked the plunge cut handle attached above. Bosch also added side drip trays, in addition to raising the end of the existing rear tray to catch water spray more effectively. They also added a slightly larger rolling table extension but removed the fence on the extension. We appreciated most of Bosch’s efforts here but took exception with this last little detail. Out of the Box This is not intended to be a full statement of your rights under the Consumer Contracts Regulations. Full details of your rights are available from your Local Authority’s Trading Standards Office. How To Return A Product The new Bosch EXPERT range of MultiMaterial disks expands functionality even further. Available for mini, small angle grinders and large angle grinders, Bosch offers you a broad range of diamond cutting wheels suitable for your existing tools. Like most tile saws with universal motors, the TC10 saw doesn’t have an automatic motor brake. And unlike most tile saws, the power cord has an integrated GFCI module to protect the saw and user in wet locations. Both features can eventually go bad and become a maintenance hassle, but it was nice to have the extra measure of electrical protection. Thanks to Boulder, Colo. area tile contractor Joe Brown for his expert contribution to this tool test.

Please note that during particularly busy periods, it may take a little longer to receive your delivery and our carrier may attempt to deliver to you on a Saturday. We offer an extensive range of different accessories for this purpose. The oscillation technology allows you to perform plunge cuts (e.g. for shortening skirting boards) without damaging any material behind. You can also select a convenient day to receive your delivery by choosing a named day delivery (delivery on working days only). Working days are defined as Monday-Friday 8am-7pm inclusive, excluding Saturday, Sunday and Public Holidays. Next Day & Named Day Delivery The diamond blade provided with the saw revealed a discernible dish when held against a straightedge. When its initial cuts showed chipping, it was replaced with a preferred blade for the duration of the testing. Rolling TableAnything of a nature that for hygiene or associated health and safety - this includes the Outdoor Spas, Mattresses and Divan Sets This stand is a bit lower at 27-3/4 inches tall and the extra leaning down exacerbates the feeling of really stretching out for the saw’s long table travel. This rolling stand adds mobility while the saw is set up or while moving it onto the job. The stand carries most of the attached saw’s weight while rolling it over driveways and yards. The rubber-tired wheels aren’t very big, but they rolled across frozen ground and skied admirably through the snow during our winter testing. As you might guess, climbing stairs was not really their specialty. There are different types of hole saws and they generally range in size between 14mm and 210mm in diameter. Holes below this size can usually be achieved using a standard drill bit, while larger holes will generally require alternative cutting methods. When working with hard materials in construction, making sure you have the right tools can mean the difference between a good job and a poor one. This can particularly be the case when cutting hard and expensive materials, such as ceramic tile, premium stone like marble and granite. Accuracy and precision are key and enable you to shape materials without compromising either aesthetic or structural integrity.

If you wish to return your item to Robert Dyas, you can do so by one of the following methods: 1. Request a Collection via Robert Dyas Customer Services