Cisco Catalyst 9120AXI-E Wireless Access Point, Wi-Fi 6, 4x4 Dual 5GHz Radio, CleanAir with Cisco RF ASIC, MU-MIMO, PoE, Internal antenna (C9120AXI-E)

Product Information

Dual-Band Polarization Diverse Patch Array Antenna, Connectors N-Female Bulkhead (4x RF Coaxial Cable needed)

Cisco Embedded Wireless Controller: The 9120AX Series Wi-Fi 6 access points is available with a built-in controller. The Cisco Embedded Wireless Controller on Catalyst 9100 Access Points provides an easy-to-deploy and manage option that does not require a physical appliance. The control resides on the access point so there is no added footprint or complexity. And, because it uses Cisco Catalyst 9800 Series code, it’s easy to migrate your network as your needs grow. Your embedded software is subject to the Cisco End User License Agreement (EULA) (link available below) and/or any Supplemental EULA (SEULA) or specific software warranty terms for additional software products loaded on the device.WiFi 6, with better coordination of transit time to and from devices, will also bring about a reduction in latency and a greater reliability allowing for hundreds of devices per access point. This allows for IoT devices to be reliably deployed at scale. And an overall improved user experience will be seen as well, as 802.11ax (WiFi 6) will improve device battery life of devices such as smartphones, tablets and IoT when compared to prior standards. Secure infrastructure

Cisco Catalyst 9166I Access Point, Wi-Fi 6E, Internal Antennas, 4x4+4x4+4x4 MIMO with XOR Radio, 5G mGig with Reg-X. Cisco RF ASIC is a fully integrated Software-Defined Radio (SDR) that can perform advanced RF spectrum analysis and delivers features like Cisco CleanAir, Wireless Intrusion Prevention System (wIPS), Fast Locate *, and DFS detection. The Cisco Embedded Wireless Controller on Catalyst Access Points runs on Cisco IOS XE Software version 16.12.2 or later. The Cisco Embedded Wireless Controller on Catalyst Access Points is built from the ground up to leverage the new aerodynamic look and smooth finish, RF excellence and next-generation technologies of the Catalyst 9100 series of access points to provide a best-in-class wireless experience without compromise. Dual 5-GHz radio support: Enables both radios to operate in 5-GHz client serving mode, allowing an industry-leading 5.2 Gbps (2 x 2.6 Gbps) over-the-air speeds while increasing client capacity.The custom solution starts with the Cisco SAgE hardware core, which has been integrated directly into the Cisco RF ASIC custom silicon. The SAgE core handles very compute-intensive operations, such as high-resolution Fast Fourier Transform (FFT) and pulse detection operations. (A pulse is a burst of RF energy in frequency and time.) The SAgE core has a highly granular spectral resolution of 78.125 kHz (4x better than the nearest competitive solution and 64x better than most chipsets).