VIVO Dual Monitor Desk Mount Stand with Height Adjustment and VESA Plates for 2 LCD Ultrawide Screens up to 34 inches, Stacked Array, STAND-V002R

Product Information

There is a lot that goes amiss even when you try to make the best purchasing decision. However, to help you through any issue regarding vertical monitor stand, we have elaborated on some frequently asked questions below; How Many Monitors Can Go on a Vertical Monitor Stand? There is value in raising your screen to the appropriate level, and a monitor arm or stand is one great way to do this. So the value is less in the product and more in the practice," Dr. Weiner says. "I believe the amount and type of monitor adjustability also depends on the nature of the work the individual does. An architect or designer who meets with clients to show computer-based plans, for instance, may benefit from a monitor arm that easily swivels for an adjacent viewer." The weight capacity of a dual monitor stand is important, because overloading a stand will cause the monitor arms to droop, wear out prematurely, or fail altogether. In the case of freestanding dual monitor stands, overloading the stand can even cause it to tip over. Dual monitor stands usually provide a weight limit per arm, which is the maximum weight the arm can safely handle. Some stands also provide a minimum weight, which is the least amount of weight it takes for the arm to work correctly. If your monitor doesn’t weigh enough, the spring-tensioned arm will not stay in place.

For the last step, you need to screw the vertical stand using grommets, and for that, you may require a desk that has pre-drilled mounting holes. If you have an in-built cable management system, you can pin the wires inside for a more clutter-free look. When you have adjustable, ergonomic features to work with, you can use your monitor for prolonged hours without feeling tired. Whether you have to do programming, designing, or just play video games, you are sure to enjoy the reduced obstructions. More Connectivity at Workstation See that your desk is stable and wobble-free so it can tolerate the weight of the monitor and the stand. Use aluminum or wood glasses as glass is prone to breakage. It is important to realize that vertical monitor stands have much more to offer holistically than decluttering your desk space and improving your workflow. Here are a few ways through which a vertical monitor stand proofs to be a great addition to any space; Ideal Eye Alignment

Fulfilling all your essential vertical monitor stand needs, VIVO has really hit the mark with this one. Users rave about its easy installation process, and many have leaned towards it for its reliable VESA compatibility and the three-year warranty. Good ergonomics is crucial to your body's overall health, especially if you're sitting at your screens for long periods at a time, which may be likely for someone using a dual-monitor workstation. Two monitors also means more variables are involved in getting your screens well-positioned in relation to each other and to you. It functions in a hassle-free manner; all you need to do is hook your monitor screen to it in the orientation of your choice. Capable of catering to monitors of all sizes and weights, It comes in exclusive designs and colors to match your space.

The monitor arms themselves hold up to 27-inch screens at up to 18 pounds each, and their adjustments include full rotation to portrait or landscape mode. The 12-inch-wide laptop tray is built for up to 11 pounds and laptops up to 15 inches in size. Most laptops will fit fine, unless you have a large-screen desktop replacement or gaming laptop. Gas springs in the arms allow for both mobility and stability, and the whole rig installs securely to your desk with C-clamp or grommet mounts. The Pro Plus 36 ships fully assembled, so there's no worries about mounting or weak points in your setup. The sturdy two-tier structure can hold a load of up to 35 pounds, and the upper surface has room for two monitors, or a laptop and a monitor, or whatever combination you might want to place there, including a set of freestanding dual monitor arms if you want the complete flexibility. If you have very large displays and the 36-inch width isn't enough, a 48-inch variation provides extra space and a 45-pound capacity. While you can find similarly capable options for lower costs, you'd be hard-pressed to match the quality and dependability of the LX-series monitor arms from trusted workplace equipment maker Ergotron. The two arms put your screens side-by-side and give you impressive independent control of each: a 13-inch range of vertical lift, 25-inch forward extension, 360 degrees of rotation and panning, and 75 degrees of up-and-down tilt. How easily the user can make these adjustments depends on the product, with higher-end arms using gas springs or other pneumatic technology to make movements smooth yet stable. Height adjustment, in particular, is something that requires extra effort in a lot of stands. So while it's possible to use static stands or risers to get your monitors to just the right level, adjustable arms and stands are much more likely to get your screens properly situated, especially if your seated or standing positioning changes. The max screen sizes you can fit on the stand will depend on your configuration, but you can fit up to 40-inch-wide displays next to each other, provided they're under 22 pounds individually. VESA-compliant monitor attachments and clamp or grommet desk mounts ensure stable installation all around. Plus, with the high-quality construction and long warranty that the Ergotron brand provides, you’ll get a lot of reliability if you're willing to pay up for it.She also encourages buyers to consider "all the pieces of the puzzle" with their workstation to determine which equipment works best for their situation, and to beware of broad marketing claims. "Most products like monitor stands and arms will be called 'ergonomic,' but that does not necessarily mean it is ergonomic for you—or ergonomic at all, for that matter,” she says.

Users like this unit for its ability to provide an extremely clean work station and add to its aesthetics. They also like the control they have over every joint on this stand, which allows for a more user-friendly configuration of the whole setup.If you’re a beginner, you might need another person to help you with its set-up. How to Set Up a Dual Vertical Monitor Stand Featuring heavy-duty steel and aluminum, this monitor stand is adored for its robust body. Users also like its dual monitor arms that can easily hold up about 1700 pounds each and can be interchanged as per the user’s need.

Housing mid-sized monitors perfectly well; it gives your space a clean appeal. Its installation process is very easy, and its VESA compliance makes it all the more hassle-free. Even though it does not feature an in-built cable management system, it has clips on the outside to secure the wires.Used in most computing environments, this monitor stand offers functionality and aesthetic at a very good price point. Even though it does not need extra fastening because of its solid base design, users can still use grommets to mount monitors weighing 22 pounds each. Monitor mounts offer better viewership as you can adjust them so that the monitor can be viewed even from elevated spots of your room. Pros and Cons of a Vertical Monitor Stand I am a fan of pneumatic monitor arms that move easily and effortlessly," she adds. "If the monitor arm requires tools to adjust it or change the position of the screen, I find that they're rarely adjusted or moved." Material and Weight Capacity