Joined in 2023 
82 
63 About this deal
Wear safety goggles and heat-resistant gloves when using a heat gun, as well as a respirator mask if working in a restricted area. These larger reflector nozzles are particularly useful for grouping together large groups of wire and applying heat shrink tubing to them all. STEINEL Flat Angled Nozzle Besides home repair, heat guns are used in engineering, physics, chemistry and science as well as other fields – but there are also some more unusual jobs where heat guns can be used. Here are our top 10 uses for heat guns:
are different heat gun nozzles for? - Skil What are different heat gun nozzles for? - Skil
Demist headlights – restore headlights from condensation by using a heat gun to evaporate the mist. To strip paint you are unsure of in a safe way you should use a non-solvent paint stripper called Home Strip. You can find out more about this in our stripper, in the section marked Home Strip and Lead Based paints. Buying a Heat Gun Reduction nozzles are perfect for concentrating airflow and heat for desoldering, welding and a range of other purposes. Glass protector nozzle: This nozzle allows you to strip paint and varnish, etc from neat a glass pane, without warming and melting the putty or glass. It the putty is warmed it can become soft and the glass can work loose, possibly falling out. To prevent this happening this nozzle directs the heat from the gun away from the glass and on to the surface where you need itis a lot of power and when this current is pulled through the cables of an extension lead they can get warm if the lead is left coiled on the drum. When using power tools of any kind always make sure the lead is completely unwound to avoid over-heating it. Heat Gun Nozzles Explained The 75mm and 50mm surface nozzles are designed to fit HG 2120 E, HG 2220 E, HG 2320 E, HG 2000 E, HG 2300 E, HG 2310 LCD, HL 2020 E, HL 1920 E, HL 1620 S, HL 2010 E, HL 1910 E, HL 1810 S and HL 1610 S STEINEL heat guns. STEINEL Reduction Nozzle The STEINEL perforated flat nozzle is designed for speedy welding. Small holes that are punched into the side of the nozzle help disperse hot air along the length of the adapter and make it easy to pre-heat plastics before welding them. Most heat guns are compatible with interchangeable nozzles, helping to optimise how the tool works on different surfaces and tasks. As a simple hand tool, there aren’t many differences between the various models of a heat gun, but here are some important features to consider:
Nozzle (Thawing, Paint, Ø 33.5 x 75 mm Bosch 1x Flat Jet Nozzle (Thawing, Paint, Ø 33.5 x 75 mm
The STEINEL nozzle is designed for STEINEL tools HG 2420 E, HG 2620 E, HG 2520 E, HG 4000 E and HG 2300 EM. STEINEL Surface NozzleThis heat gun is perfect for use in a multitude of jobs such as plastic and pipe welding, soldering, and cable shrinking. Additional Information One could say this power tool is a glorified hair dryer except it works at a much higher temperature so therefore needs to be treated with respect. (Working temperatures range from 100°C – 550°C). Do not attempt to dry your hair with a heat gun! How to Use a Heat Gun Safely The 250 x 45 mm shell reflector is designed for the HG 5000 E professional hot air gun and the 150 x 25 mm adapter fits hot air tools HG 2420 E, HG 2620 E, HG 2520 E, HG 4000 E and HG 2300 EM. Wattage – this refers to the power of the heat gun. They commonly range from 1,000W to 2,000W. If there are heat and/or airflow controls, the higher the wattage, the more effective it is.
STEINEL Heat Gun Nozzles Guide - News - Hilltop Products STEINEL Heat Gun Nozzles Guide - News - Hilltop Products
Repairing games consoles – heat guns can be used to solder components on a motherboard. For further information on this topic, see our single board guide. Defrosting a freezer – unplug the freezer, prop open the freezer door and remove all food items inside. Aim the heat gun from the floor up into the inside of the freezer and watch all of the ice melt away. This reflector nozzle is perfect for intricate work, where a consistent temperature is critical to not damaging components. It can be used for manufacturing wire harnesses and is useful in the automotive, electronics and aerospace industries. STEINEL Shell Reflector Nozzle While the typical nozzle is an open and even heat output, there are different types of nozzles that can concentrate, protect, reflect or distribute the air. Flat nozzle: This directs the heat from the gun in a thin but extended area, which is ideal for when you need to direct the heat over an extended but narrow area. It can be a little more difficult to master this, but practice will helpHeat guns should always be used carefully around copper pipe work where solder joints have been used or scotch connectors as there is a possibility of melting the solder or weakening the joint. Heat Gun Safety Drying paint or varnish – 30 to 130°C (but take care as dust particles may be blown on to the paint/varnish). The heat gun nozzles are all top-of-the-range and make life easier in all sorts of industries including electronics, flooring, roofing and much more. Reduction nozzles are also used to solder and desolder components in the electronics industry. Concentrated heat (400-455°C) loosens the solder joints, allowing the component to be removed with pliers.
Nozzles | Farnell UK Nozzles | Farnell UK
These advanced STEINEL heat guns give the user effective control over temperature output to prevent scorching or blistering tubes or sleeves. STEINEL Sieve Reflector Nozzle These hyper-concentrated reduction nozzles can also be used for welding plastic sheeting and for soldering and desoldering in electronics industries. Some heat guns can be used on a stand so that both hands are free to work with other tools alongside the hot air. To get the most effective temperature, any heat gun can be held further away from the surface to reduce the heat, but having variable settings offers more choice.Shining shoes or boots – use a heat gun to get the perfect shine by holding it one to two feet away from freshly waxed shoes/boots. Heat the wax until it shines and melts into the pores of the leather. A haze will form on the cooling wax, so dip a clean cotton ball in water and rub the wax until the haze fades. More complex models have two or three heat settings or even a variable adjustment within a heat range, combined with a choice of two, three or variable speeds of air flow. Heat guns are electric hand tools which look and work in a similar way to hair dryers – operating a fan that pulls air into the body of the tool and drives it across an electric heating element and out through a nozzle. Heat guns are sometimes referred to as hot air guns. Plastic welding nozzles are used across a variety of industries and for different purposes. Flooring installers use heat guns to weld PVC in flooring seams. Plastic welding is also used in the automotive industry, facilities maintenance and prosthetics to repair plastics. Phone screen repair – heat guns can be used to remove damaged phone screens. Slowly heat the surface with the gun set to low and about eight to ten inches from the phone. The adhesive will become pliable enough to work with.
Great Deal 
New Comment