Easy Joint Paving Jointing Compound 12.5kg – Buff Sand

Product Information

Pre-wet the pavers or slabs and begin to work in small 100 square foot areas to install the jointing compound and pre-wetting the next 100 square foot area when you move onto it. You do not want to install this jointing compound onto a dry surface. Driveway Jointing Mortar - High Strength Epoxy Resin Paving Grout - suitable for vehicle areas up 3.5 tonnes

Truly an all weather jointing compound: An all year round hard landscaping product to point your paving that can be used whatever the weather conditions are before, during or after application Smooth the joints: when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled without the need for kneeling and compressing the material by hand that will last for years. A strong joint that will resist the elements and stand the test of time - better than traditional jointing methods. EASYJoint is the original sweep-in all-weather jointing compound and still the best truly "All Weather Paving Joint Compound". Do not be fooled by other paving jointing compounds making similar claims. Azpects sells tens of thousands of tubs of EASYJoint every month to satisfied customers all over the Europe and North America.

EASYJoint is the UK's top-selling paving jointing compound, favoured by professionals and DIY installers all around the world. This product was first developed in 2009 and has now evolved to meet user demands and keep up with the latest trends in the industry. The EASYJoint family now has 9 products within the range. To further aid this, "point" or "strike" the joint; do not leave it textured. This ensures the top of the filler is below the top rounded edge of the paving and helps it adhere to the base and sides of the paving material.

Open the container, rip the bag open, and pour it onto the paving surface. Immediately wet the jointing compound. We like to use a mixture of the shower and horizontal setting on the hose nozzle to move the jointing compound around the paving surface.Smooth the joints:when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool In my experience, it is an easy installation that takes about twice the time than a typical polymeric sand installation. I was certainly happy with the installation and the permeability of the product, especially for open graded bases. In tighter joints, it requires more patience to get the grains into the joints and may require a compactor to be able to achieve this or a thin tool to push it into the joints. A lot of water is required in the installation of this product and it is much easier with two or more people. A squeegee and / or soft bristle broom is required.