WOCA Worktop Oil All You Need for The Maintenance of Kitchen Worktop or Furniture. This Danish Oil for Wood Highlights The Wood’s Natural Glow Fresh Appearance.(Natural) 0,75L

Product Information

The products embrace a wide range from lacquers, oils, furniture- and countertop oils to outdoor woodcare, soaps for cleaning of vinyl- and laminate flooring, wooden floors, tiles, and products for outdoor cladding. There are a wide variety of oils out there that are recommended for treating wooden worktops, however each one has its own application instructions, its own advantages and disadvantages. So, the question remains, how do we choose the right wood worktop oil? The number of coats can depend on the type and condition of the wood, many of the traditional oils may require anything from 3 to 7 coats to be effective and with drying times of around 24 hours between coats, oiling a wooden work top could take as long as a week. In comparison, most modern top oils require just 2 thin coats and are dry in 4 to 8 hours, depending on the oil brand and environmental conditions. Worktop durability

The oil is thoroughly hardened after 24 hours at 68ºF. Do not let the treated surface become wet during the hardening process. Pure linseed oil can penetrate the timber worktop better than any other natural oil hence it is quite suitable in the treatment of hardwood worktops. Although it is excellent in penetrating the pores, the process can take some time. After it has penetrated, the rub-in oils will naturally dry and seal the worktop pores to form a very even and perfect surface. These oils provide the base for many popular worktop oils, but with the addition of extra salts and added chemicals to help the curing process. The infamous Danish Oil is one of them.And monthly / 2 monthly the Woca Natural Soap on a firmly wrung cloth. To be maintained (annually) with Werkbladolie for optimum protection. Thoroughly clean the surface with Intensive Wood Cleaner, mixed 1:20. Then wash with clean water. After cleaning, leave the surface to dry for at least 12-24 les heures We know excactly what to look for when providing the wood with the optimal treatment. Created on a sustainable foundation

Then wipe off all excess oil with a lint-free cotton cloth. No excess oil should remain on the surface. Our product range is divided into a manageable step by step system focusing on the following: Preparation, Basic treatment and care and maintenance. Is your oak worktop solid oak or veneered? Is it bare wood or does it have an existing finish? From what you are saying it sounds like it is bare wood or that the original finish has worn off.Extremely tough and hard-wearing seal which protects against aggressive stains such as wine, fruit juices and etc. Lad olien trække ca. 30 min. Ved 20°C. Hvis olien absorberes hurtigt ned i træet, påføres mere olie. Developed and produced in our factory in Lunderskov, where we dare to think big based on our sustainable approach and push the boundaries for innovation. Use a brush on completely clean and dry surfaces to massage the oil with a polishing pad or waterproof sandpaper. For more than 50 years we have been driven by our passion for creating the best and most sustainable solutions in treatment, maintenance, and protection of wood.

Apply an even film of Worktop Oil to the surface with a natural bristle brush or lint-free cotton cloth

More often than not worktops are fitted before application, workmen are often in a hurry to get things done before you are able to get that treatment applied. Or it could be that you have inherited a worktop when moving to a new house. What ever the reason it is not the end of the world if you are not able to cover all areas. I myself have a solid wood worktop and have only treated the top and sides and so far have had no warping after 3 years.