DrayTek Vigor167 modem 30000 Kbit/s

Product Information

The configuration and commissioning is, as is already well known from the Vigor160 series, very simple and intuitive and does not present the user with any unnecessary challenges so that the modem can start operating in the shortest possible time.

Quick Start Guide | DrayTek Quick Start Guide | DrayTek

I am using the same DNS, same router (vigor just set up as a bridge modem, same as the old TP-Link). EcoNet was originally MediaTek's broadband business unit , so basically the EcoNet EN7556N is a MediaTek chipset which can be found in some of the low end TP-Link modems such as the TP-Link VR1200v , VR300 and listed as MediaTek ENxxxx It should also be noted that with regard to ADSL, both the variants Annex-A and Annex-B are combined in one device for the first time, which also further increases the possibilities for using the modem. any client behind Openwrt can reach the Draytek on 192.168.0.1 (or any of Draytek's devices on that network) (unless something really screwy on your configs but, out of the box, ANY pair of routers will behave like this.

3.1 Network Connection

The chipset is currently not proven on Aust NBN , I could be wrong , but if it performs the same as the Lantiq chipset on the Vigor 130 , then it should be all right and , especially if the Vigor 167 is using super vectoring. The TCP port has been changed. By default, HTTP uses port 80, but you can deliberatelychange that. If you have done so, you need to append the port number to the URL, for example http://192.168.1.1:88.

DrayTek Vigor167 | DrayTek

Anyway, I've changed the modem code from the default 5.12.24.0 to 5.12.18.17 (5.12.18.16 was not an option with the only other option being 5.12.23.5) Vigor167 product news 9-april-2021 In German, but (basic) translation below: https://www.draytek.de/aktuelle-news-lesen/items/vigor167-neu-annexa-telekom-testcenter-annexb-modem-supervectoring.html As I understand it, the Draytek is connected via its modem to FTTN and the routing/switching function is active on all the LAN ports.

The Vigor 167 can be setup as a standalone VDSL modem to pair with existing Ethernet WAN routers/firewalls or it can be used as a basic router. Provides Annex A modem code 572d07 & 570e01, and Annex B modem code 565607 & 567002.Recommended for Netherlands. (G.Vectoring) 3.9.8.4-07v Ideal partner device for DrayTek dual-WAN products or any other vendor's Ethernet WAN firewall. Reports DSL Line Status on DrayTek Vigor routers. The Vigor167 is characterized by its diverse compatibility with most DSL variants and profiles. It supports everything from DSL Light to the most common VDSL and ADSL variants, such as Profile 17a, with and without vectoring, to Profile 35b supervectoring. When I do an ipconfig, it shows nothing at the default gateway when it's connected directly to the PC.