Joined in 2023 
82 
63 About this deal
The wireless implementation on the mouse is just as good as a wired mouse in terms of latency/ delay/ lag. In my use cases, the mouse does not seem to have any connectivity issues with the receiver located at the top end of my mousepad. Since it is a wireless mouse it has a battery rated at 70 hours and despite there being mice advertised with much longer battery lives, I don’t think its an issue that the X2 Mini is only rated at 70 hours. I only charge it when I remember to and haven’t experienced it dying on me mid game since the side dpi button flashed red when it is close to death. As I said before, there are no holes on the sides of this mouse. Pulsar has removed those because a lot of people dislike the feeling those holes give you while gripping the mouse, so it’s a logical design choice, but just as with the regular sized Xlite V2 there are still some holes near the top of the shell. With this being a smaller mouse I personally still feel the holes on both sides when gripping the mouse normally. On the regular version I don’t feel them with my thumb, but here I do due to the shorter length (and overall size) of the Mini, so for me the solid portions on the sides of this mouse are a bit useless, but that might just mean that my hands are too big for this mouse. Still, it’s something to note if you dislike the feeling of holes. We've added a link to the newly-reviewed HyperX Pulsefire Haste 2 in the Sensor Specifications section of this review. As for battery life, the Pulsar X2 Mini is rated at 70 hours per full charge. I got about 2-3 weeks of use before seeing the battery indicator flash red. Conclusion Being smaller than the regular Xlite Wireless V2, it is only logical that the V2 Mini weighs less as well. I weighed it in at 55 grams, which is extremely light for a gaming mouse. Just as with the regular version, there are no holes on the sides of the V2 Mini.
Once you have your replacement mouse skates in hand, it's now time to remove your old ones from the base of the mouse. There are a few different methods to do this, but we’ll cover the main, most reliable method (in our opinion): With a little preparation and some simple steps, you can enjoy better control and performance like the pros. Preface: With the release of the Red and FE Green colorways of the X2 and X2 mini right around the corner and the “GOATS” variations around the other corner, I wanted to share my thoughts on the mice that many people seem to be weary of due to QC issues. I will only talk about the quality and performance of my units. The sensor is a PixArt PAW3395 sensor which I do not think matters as much as people want it to. As a low sensitivity player (52cm/360) I have found no issues using this mouse at a polling rate of 1000hz on a variety of mousepads in a plethora of games and even though it has motion sync, I also do not think it matters all that much. I have used the mouse with it enabled ever since Pulsar updated their firmware. I won’t talk about the firmware since it is not something that is needed to use this mouse.We've converted this review to Test Bench 1.5. This update adds a new Main Button test group, which provides button actuation data and switch information. We've also made minor changes to how we calculate the Office usage score. For more details, you can see our full changelog here. When you're looking to switch out your skates, you’ll need to choose replacements that fit your specific model of mouse due to each mouse having a different layout on its base where the skates are installed. The exception being brands who use the same mouse chassis for multiple models, but that will be mentioned on the skates product description.
We've added a link to the newly-reviewed HyperX Pulsefire Haste 2 Wireless in the Wireless Versatility section of this review. Pulsar X2 Mini has a smooth matte surface that is consistent across the entire shell. I would say that there is some amount of coating to it, but it will instantly feel minimal if your hands starts to sweat. The surface is easy to clean and does not leave fingerprints lingering. I’d recommend getting a grip tape (unfortunately not included in the box) for better grip when gaming. Shape and fit Equipped with the PixArt’s LATEST FLAGSHIP PAW3395 sensor capable of 650 IPS, 50g acceleration, 26,000 programmable DPI and 1000hz / 1ms polling rate. This is the highest performance optical Gaming mouse sensor. Despite its light weight of 52g, the Pulsar X2 Mini feels very solid in my hand. There is no rattle heard when shaking the mouse horizontally, but I do hear slight rattling when shaking it up/down. When applying pressure on the shell of the mouse, I don’t hear any creaking of the plastic.Pulsar X2 Mini Wireless Gaming Mouse ที่ทางแบรนด์ Pulsar ได้รังสรรค์ออกมาเพื่อตอบโจทย์คนชอบเมาส์เล็ก บาวและใช้งานได้อย่างยาวนาน มี น้ำหนักเบาเพียง 52 กรัม รูปร่างสมมาตร สามารถจับได้ทั้งมือซ้ายและมือขวา ด้วยขนาดที่เล็กสามารถ จับได้ทั้งแบบ Fingertip Grip และ Claw Grip ตามแต่ความถนัดของผู้ใช้งาน สามารถ เลือกใช้งานได้ถึง 2 สี ไม่ว่าจะสีดำหรือสีขาว ก็สวยงาม นอกจากน้ำหนักที่เบาจนเป็นเรื่องโดดเด่นแล้ว การเชื่อมต่อแบบไร้สายยังโดดเด่นไม่แพ้กัน ด้วยการ เชื่อมต่อแบบ Wireless 2.4Ghz จึงทำให้สามารถใช้งานได้อย่างลื่นไหลไม่มีอาการกระตุกเข้ามากวนใจ The side buttons still feel mushy and pretty cheap, and while there is no noticeable pre- or post travel these can still be improved by a lot.
Once you have removed all the old skates from the base your mouse, give the surface a clean by using rubbing alcohol (Isopropyl). This will remove any excess adhesive that may still be present. Leave the mouse to dry, and then it's time to apply the new ones.Precisely adjust everything with our Software. Re-assign keys, make macros, adjust debounce time as low as 2ms and more.
First came the fire and then the wheel. Humans have on several occasions in history changed the way we live our lives, and the way we see the world. Now it has happened again, Pulsar launches their new mouse X2 and X2 Mini! Simple but not simpler.” We kept this in mind all the time when we designed X2 structure. We designed a structure as simple as possible but maintained its durability. In the result, you are getting high performance gaming mouse that is lighter than the egg in your hand. Before applying the grip tape, it is essential to clean your mouse to remove any dirt or oils that may interfere with the grip tape's adhesion. Use a soft cloth and rubbing alcohol to gently clean the surface of your mouse, taking care not to damage the coating. Make sure to remove all the dirt and oil residues, especially around the edges of your mouse.
4K Dongle
Finally, once the grip tape is properly applied, use a sharp hobby knife or scissors to trim any excess grip tape from around the edges of your mouse. Trimming the edges gives your mouse a clean and finished look. Something that really impressed me about the Xlite Wireless V2 was its build quality, and the same goes for the Mini version. A mouse that’s this light can often feel flimsy in some areas but that isn’t the case here at all. Of course that bottom plate isn’t the sturdiest plate around, and you canget it to flex a little bit if you apply pressure in some areas (even though I was surprised at how well it held up even when applying abnormal amounts of pressure) but this is no issue at all when using the mouse normally. Shaking the mouse did not reveal any issues. The build quality is once again very impressive. The scroll wheel is almost completely quiet and has subtle steps, so if you’re looking for a very tactile wheel this probably won’t please you, but for the vast majority of gamers I see this being completely fine. Build Quality and Cable We've renamed this review as the Pulsar X2 to better match the advertised product name. The review has been updated to reflect this change.
Great Deal 
New Comment