276°
Posted 20 hours ago

ERYONE Silk Rainbow PLA Filament 1.75mm, 3D Printer Filament PLA, -0.03mm, 1kg(2.2lbs)/Spool,Metal Luster Silk Rainbow

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

As with other PLA filaments that have embedded particles, it is best to print this with a wide-diameter nozzle. It is also a brittle filament, so best to handle it with care. AMOLEN has an entire line of glow-in-the-dark filaments but this multicolor variation takes the cake. 3. CC3D Purple to Pink Color Change PLA Filament Printing with rainbow filament is just about the most fun you can get from 3D printing. They are unpredictable, but they typically will produce beautiful products. One of the best things about printing with rainbow filaments is that the product may look different every single time. Experimenting with rainbow filament is very fun, especially if you swap between different colors and brands. There really is no wrong way to go about 3D printing with rainbow filament, and any technique is valid as long as you like the results you are getting. However, there are changes to slicer settings you can make to get specific results. Print large models You will see more strings between the separate parts of your print, and you'll notice that the extruder leaks out tons of plastic while moving between separate areas of the print. If this happens you ought to attempt to incrementally lower the temperature by 5 degrees until the extruder isn't leaking such a lot of material with affordable 3D Printing services . Because the overall amount of material used wasn’t significant, the color change is very subtle and gradually changes from a saturated green to a yellow-green mix. To increase the speed of the color transition, this model could have been printed with a higher level of infill or increased in size to increase the total amount of material used.

Rainbow PLA 3D Printer Filament, Shiny Multicolor SUNLU Silk Rainbow PLA 3D Printer Filament, Shiny Multicolor

We will start this list with the most basic rainbow filament made with a Silk PLA base material. This gives finished 3D prints a very shiny finish that helps in making layer lines less visible. This means you’ll get all the rainbow colors on your model, even for smaller prints. It gets even better because different prints will create different effects. Printing Tips: Recommend Heat Bed 50-60°C, Recommend Printing Temperature: 220°C, To Avoid being Tangled, Insert Filament into Spool Holes to Fix after Every Time Use, For First Time to Print Silk PLA, Pls Decrease Printing Speed to 50% as Normal PLA while 3D Printing Bangalore . PREMIUM QUALITY- High quality silk pla filament with high purity and without no bubbles, no jamming, no warping, melt well, feed smoothly, outstanding printing appearance STRONG COMPATIBILITY-Perfectly compatible with 99% FDM 3D Printer & 3D Pen.Comgrow Creality Ender,ANYCUBIC,Creality 3D,SUNLU,ERYONE,MYNT3D,3Doodler,1.75mm pla filament consistent diameter, dimensional accuracy +/-0.03mm

4. Mika 3D Silk PLA Filament

This material also produces stunning 3D models with a great surface shine. One buyer said he thought having three intertwined colors would be fussy, but he still got the filament.

Rainbow Filaments – 3D Printerly 6 Best 3D Printer Rainbow Filaments – 3D Printerly

PLA FILAMENT SHINY MULTICOLOR - The PLA filament adds new shiny material, making the filament show different shiny colors in different light angles at a good 3D Printing quote. The same object can change colors when you move it or see it from a different angle. Colors change fast, so you can get all colors in one object-about 200g. AMOLEN PLA 3D Printer Filament, PLA Filament 1.75mm Silk Shiny Filament Red Gold Filament, 3D Printing Filament 1KG/2.2lb He also loved how the print came out with exceptionally vibrant color after he printed it with his Ender 3 V2.The matte finish of the filament gives the finished 3D prints from this filament a unique character. Of course, you can also smooth and polish the surface of the 3D print to make it glossy. Either way, the colors are very vibrant and can produce really good prints. Tips on printing with rainbow filament Most rainbow filament advertise a color change every 3 to 5 meters. There are gradual transition zones between different hues. The end result should be a 3D print with a smooth color gradient from top to bottom. The rate of color change can vary based on the filament, but it can also be influenced by changing your slicer settings. Top 5 rainbow filament recommendations AMOLEN PLA 3D Printer Filament, Silk PLA Filament 1.75mm, Silk Multicolor Rainbow Filament, 3D Printing Filament 1KG/2.2lb

3D Printing with Rainbow Filament – Tips and Best Brands

The glossy finish and color gradient of this filament makes it excellent for 3D printing in vase mode. This takes full advantage of the fast gradient without making the transitions too drastic. This filament prints almost as easily as standard PLA, although the manufacturer recommends printing it on a heated bed. The product has green, red, yellow, purple, pink, and blue as its main colors. The first color is random, but they interchange every 15-18 meters. This filament’s bright colors make it a great option for creating attractive and unique prints. They were able to print different Flexi animals and still got amazing color changes. When it comes to color transition, every printer has its own expectations. One buyer said they loved the filament for the vibrant colors with a nice sheen finish and color transitions.Fast Color Change & Excellent Silk Texture - Color change every 5 meters, allow you to print multicolor in one small 3D printed item. Amolen silk rainbow multicolor filament has amazing silk texture, outstanding silk glossy smooth appearance while 3D Printing in India . Prints finished by our silk rainbow pla will definitely give you an eye-popping result. When you have a temperature-controlled bed, printing directly on glass is often an excellent option. The recommended bed temperature for PLA is 70C for 3D Printing services in Chennai.

R3D PLA Rainbow - 3DJake UK

When printing with a rainbow filament, you want your finished product to take on the filament’s actual gradient. However, some of the filament will inevitably end up in the inner shells of the print as well as the infill. This is kind of a waste since this is material that is not visible. One user said he got some great prints out of the PETG filament. He loved the color pattern and the effects it created when printing. Another user who printed a car said the item was super gorgeous. He specifically loved the pearlescent color fade, which he claimed was wonderful. Fast Color Change Rainbow Multi Colors Silk PLA: Around Each 3 - 5 Meters to Change Color, Gradually Changing Color Much Much Faster than Normal Rainbow Silk PLA on Market, You Can Print Multi Beautiful Different Colors in One Spool Filament, Silk Glossy Smooth Appearance, Perfect for Arts, Crafts, DIY, Many Different 3D Print Projects and 3D Printing online. Silk PLA 3D Printer Filament 1.75mm 1KG 2.2 LBS Spool 3D Printing Material CC3D Shine Silky Shiny Metallic Metal Gold Silver Copper Bronze PLA Filament (Silk Rainbow)Premium Quality- AMOLEN Silk PLA filament Raw materials are from USA Good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. AMOLEN filaments, which have premium quality, print Much More Smoothly with affordable 3D Printing services. SMOOTHLY PRINTING - With greater toughness, 3d printer filament feeding will be smoother and will not break in the tube. The dimensional accuracy of the PLA filament 1.75mm is +/-0.02mm, so that print will be smoother without jamming nozzles at 3D Printing companies. No polishing needed, printing at a high detail results in a beautiful finish with online 3D Printing services.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment