About this deal
Take care when cleaning the surface afterwards, sharp points and corners could get lifted accidentally. Measure out how you want it to fit, we recommend keeping the logo under the top of the windshield at minimum and above the arrows marked on the windscreen (whatever is legal for your country for sunstrips)
Place the banner down gently. Make sure all your adjustments are made at this stage before progressing. Use common sense! Whilst they are rated for outdoor use, don’t place them anywhere there will be extreme temperatures, take care of your girls. Press down firmly with the squeegee to get it up to the seal. Do the side sections separate from the top and trim using a razor blade sitting in the corner the seal makes with the windshield. Drag the knife towards you gently holding the same angle around 30 degrees.Ensure surface is appropriately cleaned beforehand and weather is calm. Little wind if applying outdoors. Use masking tape to keep the banner centred (Align the banner vertically and horizontally, use a ruler for precise measurements)