Hammerite Direct to Rust Metal Paint Aerosol Smooth Black Finish 400ML

Product Information

P102 Keep out of reach of children.P101 If medical advice is needed, have product container or label at hand.P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P233 Keep container tightly closed.P262 Do not get in eyes, on skin, or on clothing.P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P312 Call a POISON CENTRE/doctor/…/if you feel unwell.P235 Keep cool.P501 Dispose of contents/container to … On bare zinc, aluminium and galvanised surfaces, apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes. Apply light even coats, from a distance of approximately 15cm (6 inches) and keep the aerosol moving. Do NOT concentrate spray in one spot.

Using spray paint is an easy way to protect and revive your metal objects. Follow the guide below if you want to know exactly how to spray paint metal: Abrade smooth surfaces and remove all loose and flaking paint with a wire brush. Remove dirt and dust with diluted detergent. Remove grease with Hammerite Brush Cleaner & Thinners. Then rinse with clean water and allow time to dry. H226 - Flammable liquid and vapourH336 May cause drowsiness or dizziness.H412 Harmful to aquatic life with long lasting effects. Spray a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for 1 hour.