T55 x 55mm 1/2" Drive Torx Star Socket Male T-Star Cr-V Steel AU638

Product Information

Fast Reliable Service... your goods will normally be delivered within 1 to 3 working days - call us if you need them urgently!

ITX 19 T55 | Gedore Torx Screwdriver Bit, T55 Tip, 55 mm

The most common sizes of a Torx screw are T10, T15, and T25. There are also specialized Torx sizes, including T47, T55, T60, and T65. These are used in certain circumstances, but they are not as common as the T10, T15, and T25. The Torx screwdriver was invented by Camcar Textron in 1967. It is considered one of the most efficient fastening systems. The design has six points and a center pin. This design allows for more torque and minimizes wear.A key advantage of the Torx system is that is allows higher torque transmission than other drive systems enabling fastenings to be tighter and therefore more secure. The SAE is an acronym for the Society of Automotive Engineers. It was created to standardize measurement in the engineering space. The SAE is now known as SAE International, and it has 138,000 members worldwide. The organization sets standards in North America for the construction and automobile industries.

Torx Bit Sizes Chart | Standard and External Torx Torx Bit Sizes Chart | Standard and External Torx

Whether you are buying a new set of Torx tools or replacing a broken one, you will need to make sure you buy the right size. There are three standard sizes of Torx, and each one can be distinguished by the T before a number. In addition to these, there are also specialized sizes that are designed for specific uses. You can browse the chart below to find the right tool for your project. If you need to know which size of Torx is the right one for a specific project, take a look at the Torx bit sizes chart. It will tell you which Torx bits are compatible with which screws. KC Tool Here’s a summary of just some of the issues associated with various typical, commonly used drive systems. Hex Drive One common problem with flat-head and Phillips is cam-out. It is a process where the screwdriver driver slips out of the screwhead if the torque exceeds a limit. The design of the Torx head prevents this cam-out and thereby causes less damage to head. Torx Plus is designed for high torque transmission. This means that higher torques can be used to securely tighten fasteners without incurring additional wear and tear on the tools. High torque capability is also very important in service situations where corrosion may increase the torque required to loosen a fastening. Tamper Resistant Torx Plus DriveThe most obvious SAE vs metric equivalent is the size of the Torx bit. These bits come in a variety of sizes and are typically not interchangeable. The smallest of the lot is the T10, which is about the size of a 1/8" hex. The largest is the T47, which is about the size of a quarter. These bits are designed to work in many thread systems. The Torx Plus drive system is another variation of the Torx. It is also known as External Plus. The lobes are more square than the original design. This design allowed for higher torque on the head. The Torx Plus also has five-lobed tamper-resistant variants. This design requires the right tools. The Torx Plus, also known as the Internal Plus, is an improved version of the original design. This version is designed to provide better torque transfer than the original design. The lobes on the screw allow for increased torque without causing much wear on the tool.

Drive T55 Torx Bit Socket - The Home Depot 3/8 in. Drive T55 Torx Bit Socket - The Home Depot

Tamper Proof Torx (Secure Torx) version of the “Plus” had only 5 Lobed instead of 6. These are not that popular. Slotted screw heads which accept flat-bladed screwdriver bits are very familiar. This style of screw and driver is not appropriate for automated assembly as tool alignment is not automatic. The following is a Torx Bit Sizes Chart for Internal Torx. Two dimensions are important with respect to Torx screws. They are Point to Point and Diameter of the screw threads. Torx Size The most common sizes are T10 and T25. The head height is 0.062 inch (1.6 mm). The head diameter is 0.50 inch (1.27 cm). Some other specialized sizes include T55 and T27. Even if you apply a higher torque than the limit on a Torx screw, it will not damage the screw head or the bit itself. Both the Torx screws and the screwdrivers can last longer than other drive types.

Camcar Textron trademarked a special screw drive with the name Torx. The main characteristic of this drive is its 6-point pattern that looks like a star-shaped pattern. As a result, many started calling it a Star Screw. The drive systems used by various fasteners have a huge impact on productivity and product quality. For example, an inefficient drive system will increase assembly time and therefore eat into profitability. Using a Torx Bit Sizes Chart is a great way to know which size to buy for a specific fastener. The chart can help you understand the difference between metric and SAE, and can also tell you what size is a good fit for the job at hand. It can also help you choose between an external Torx and an inverted Torx. Torx Bit Sizes Chart The metric system is also the standard for airplanes and boats. To make the process of repairing vehicles easier, the SAE standardized the measuring system. It's also been adopted by major vehicle manufacturing hubs in other countries. Having a good understanding of the difference between an External Torx and an Inverted Torx will ensure that you get the right bit for your project. Both types of screws have similar characteristics, but you'll want to use the type that best matches your needs.