S-250-12 12V 20A DC power supply

Product Information

With its open-source measurement tools, the SIGNALlab 250-12 offers a range of features to meet your requirements. It allows for remote control and measurement, providing convenience and flexibility.

SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost.Free online apps (oscilloscope & signal generator, spectrum, Bode analyzer, logic analyzer, LCR meter*, streaming, network manager and calibration tool) Before you continue, note that in the problem 250 divided by 12, the numbers are defined as follows:

Multiply the divisor by the result in the previous step (12 x 2 = 24) and write that answer at the bottom: Here we will show you step-by-step with detailed explanation how to calculate 250 divided by 12 using long division. Multiply the divisor by the result in the previous step (12 x 0 = 0) and write that answer below the dividend. The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed & online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources. Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards.

Aluminium alloy QQ-A-250/12 has similarities to the following standard designations and specifications: Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date.

Subtract the result in the previous step from the first digit of the dividend (2 - 0 = 2) and write the answer below. Multiply the divisor by the result in the previous step (12 x 0 = 0) and write the answer at the bottom: If you are looking to get into Software Defined Radio, look no further than SDRlab which was developed specifically with this use in mind. RHS in cold and hot finish. Mild Steel Rectangular and Square hollow section, also called box section. Can be supplied in various grades including BS EN 10025 S355 and S275. The SIGNALlab 250-12 is based on a powerful Xilinx Zynq® 7020 Dual-Core Arm® Cortex®-A9 CPU and FPGA, with 1GB DDR memory and 1Gbit Ethernet connectivity. It features two-channel 250Msps, 14-bit signal generation, 12-bit signal acquisition, and two-channel 250Msps. Accuracy and quality of the signal are assured with 12-bit ADC resolution, a frequency response of ±0.5 dB up to 45MHz and -3dB at 60MHz, and channel isolation >60dB (DC to 100MHz).SIGNALlab 250-12 is the most sophisticated Red Pitaya digitizer, built for more demanding industrial applications and research, where robustness and performance matter more than cost. Hot rolled RHSs are made one piece, whereas cold formed RHSs are made of a flat sheet rolled at right angles and welded.