Bahco BH808050 bit ratchet screwdriver, 255mm length

Product Information

On the larger Klein Tools screwdriver, using strong force to insert a screw into a walnut board was more than it could take, and the ratcheting mechanism broke. Grip shapes and styles vary from screwdriver to screwdriver. Some brands have one handle design that they use on all of their products, and some tradespeople have come to prefer them. Other models use tapered grips, allowing for several hand or grip positions. The directional collar on the Bahco switches directions smoothly, and the screwdriver’s ratcheting action is smooth. We inserted screws into pine, ash, and walnut boards, and the Bahco didn’t miss a beat, even when we exerted force. There’s a tiny bit of play in the shaft, which we would have preferred not to be there, but it wasn’t enough to affect the tool’s performance. teeth ratcheting screwdriver which permits smooth operation and minimum rotation arc to catch the next pawl tooth Screwdrivers are essential pieces of kit, used by DIYers and professionals alike. Ratcheting systems give you a mechanical advantage and make the job much easier to complete.

The benefit of ratcheting screwdrivers is that you can get a firm grip on their handle and apply plenty of torque repetitively without adjusting your grip. Not all screwdrivers handle torque as well as others, so try to find a robust, durable model. When it comes to really cranking down on a fastener, the Megapro ratcheting screwdriver has all the grip you could need. This ratcheting screwdriver’s shaft doubles as a ¼-inch nut driver, and it comes with 12 bits (six double-ended bits), including four Phillips bits, two square drive bits, two slotted bits, and four Torx bits. By simultaneously depressing the two buttons on either side of the handle, we were able to eject the storage tray that comes with six bits—two slotted and four Phillips head. The shaft comes with a magnetic head that holds the bits securely. As opposed to storing your bits inside the handle, several models come with storage on the handle. These models have slots or holes for holding the bits right in the grip. They either clip into place or slide in from the bottom of the handle. The most common style of ratcheting screwdriver stores its bits inside the grip. Often, there is a cap that threads on and off or pops out of the handle, providing access to the driver bits. Multiple bits clip to a removable ring, allowing you to choose the appropriate bit or store it away securely. Other models have bit-clips built into the cap.

The Workpro Ratcheting Screwdriver features a nonslip grip and solid feel, making it easy to get a firm grasp on the handle. The tool stores six 3.5-inch double-ended bits in its base, which gave us 12 different bits to choose from, including slotted, Phillips head, star, and Torx. The bits themselves are magnetic—rather than the head—but they remained firmly in the tool, even when we shook it upside down. There are some things worth considering when shopping for the best ratcheting screwdriver beyond just the style of bit storage. Consider the length, the grip, and other built-in features you might find with certain models. Keep the following points in mind while shopping so you’re sure to get the best ratcheting screwdriver for your needs. Types of Ratcheting Screwdrivers

We also tested the wire stripper, and it easily removed the insulated sheath from household electrical wires, making the Milwaukee a beneficial tool for DIY electricians as well as for assembling furniture and other projects.

Don’t expect frills or extras with the Williams T-Handle Ratcheting Screwdriver, because you won’t find any. What you will find is a solid screwdriver that comes with a long shaft and accepts standard ¼-inch bits. It comes with just one Phillips-head bit. There are a handful of styles of ratcheting screwdrivers, so the results of our tests and this comprehensive guide let you know what’s out there before you start shopping. The main difference in style is how each screwdriver stores its interchangeable bits. There are benefits to each style, so it’s worth giving some consideration. Bits in the Handle A single screwdriver is a far more streamlined tool than a ratcheting screwdriver kit. The bits all fit inside or on the handle, allowing you to keep everything with you. The issue is that you simply won’t get as many bits as you would with a kit. Also, when storing all of those bits on board, single ratcheting screwdrivers tend to be heavier. Ratcheting Mechanism Slide tray that keeps 6 different bits handy and secure: PH 1, PH 2, PZ 1, PZ 2, slotted 4,5 and 5,5

The Wera comes with six bits, including two Phillips-head bits, two square drivers, and two slotted drivers. The shaft also doubles as a ¼-inch nut driver. If you’ve ever tried to tighten or loosen screws in tight spots where a straight-handled screwdriver won’t fit, consider the MulWark Low Profile Mini Ratchet Screwdriver. It comes with 20 bits, featuring an assortment of Phillips-head bits, slotted bits, torx bits, and hex bits. It comes with a strong magnet in the head so bits don’t fall out. No onboard storage because this tool is just too small, but the bits fit in two plastic holders that can be easily stored together in a drawer.If you’re still a little twisted up about buying the best ratcheting screwdriver, the following section will help. It includes some of the most frequently asked questions and answers about ratcheting screwdrivers. Q. How does a ratcheting screwdriver work? Not all screwdrivers will have their torque rating clearly displayed, but durable models can handle around 50 newton meters (nm) or about 36 foot-pounds of torque. Taking a screwdriver beyond its torque capacity will usually break the pawl or shave teeth off the ratcheting gear, making the screwdriver useless. Length The MulWark is made to insert and remove fasteners where there’s very little room to maneuver. Although it was the smallest ratcheting screwdriver we tested, we were able to insert screws in different types of wood—even in walnut—without the ratcheting mechanism failing. But because the MulWark is intended for use with fingers, not a fist grip, our fingers wore out before the tool did. For those times when you need to insert fasteners behind a mounted flat screen or in another tight spot, the MulWark shines. Ratchets are great and save you a lot of time, but the best ratchet screwdriver, like the Wera Kraftform, will have a switch to change direction without removing the tool from the screw. The Milwaukee is a solid little tool, and its ratcheting action is among the smoothest of the models we tested. This didn’t come as a surprise, since the Milwaukee brand is well known and has a great reputation for making quality tools. The head features a strong magnet that holds the bits in place, and the directional collar is well made and easy to switch.

Most ratchet screwdrivers use ball detents or magnets to hold their bits in place. In either case, removing the bit simply requires pulling the bit straight out of the shaft. Why Trust BobVila The Wera ratcheting screwdriver feels solid in the hand, and one of the first things we noticed was its nonslip, ergonomic grip that’s contoured to help the user get a firm grasp. The bit storage base slid out easily with just a light push of the button on the bottom, making it easy to select the bits. We inserted screws in pine, ash, and walnut boards, and the screwdriver held up to all densities. When looking for the best ratcheting screwdriver, notice they come in different lengths. Standard-length models are around 7 or 8 inches. Stubby models are under 3 or 4 inches. You can also find longer models with long shafts and handles over 9 inches long.If you’re looking for a heavy-duty ratcheting screwdriver capable of frequent use, consider the Wera Kraftform Kompakt RA Screwdriver. This ratcheting screwdriver has secure in-handle storage for your bits. It also has an ergonomically designed grip for comfortable use and plenty of torque. We tested the Workpro by inserting screws in a variety of wood types, and it came through with flying colors—even when we used maximum force and dense walnut wood. We then tested the tool on a range of fasteners and found the bits are well made and appear to be hardened steel. Each of the ratcheting screwdrivers we tested was pushed to its limits so we could get a good idea of how it would perform over time and in various situations. With each tool, we inserted screws into three types of wood—pine, ash, and walnut—to see whether the ratcheting action would stand up to the different densities.