Plastic Ventilation Duct Sealant 310ml

Product Information

Our new simple one-page decking identification guide, highlights the three key pieces of information you need to easily identify the type of decking you are working with and the specific fixing required. Energy saving calculations can be carried out after application, but it has been possible to reduce fan speeds and is some cases, reduce fan size after Aeroseal, whilst still achieving the required air volumes. Ductwork flanged connections, slip joints, seams and fixings can all leak, making it almost impossible to manually find and seal all leakage points on an installed system.

FiloSeal+HD | Duct seal | conduit sealing system | Gas tight FiloSeal+HD | Duct seal | conduit sealing system | Gas tight

The revolutionary and patented AEROSEAL process was developed in the 1990s at the University of Berkeley/California. This can place the ductwork installer in a difficult position where they are unable to meet the design specification of the system without incurring huge additional cost and time delay. Poor performing HVAC systems can lead to poor indoor air quality (IAQ) and a reduced level of comfort in buildings. As a result, achieving leakage rates outlined in BESA DW144 and an air tightness class C or D for an already installed air duct system was usually not possible.After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability. Other building services such as walls, ceilings and other characteristics can restrict access to the ductwork system making manual sealing difficult. Our handy guide has been designed to quickly identify which of our pipe clamps are suitable for use with popular pipe sizes. System leakage can be reduced by over 90%, allowing systems to meet design specification, and can therefore be upgraded to higher classification.

sealing solutions for cable and pipes l CSD Sealing Systems

SmartSeal® software gives live data throughout the Aeroseal sealing process, this monitors ductwork pressure and the reduction in ductwork leakage.We can arrange anchor testing for load capacity and quality of fastening for anchors in concrete and masonry, by trained engineers in accordance with the recommendations of BS8539. It provides a tough, resilient air-tight seal which prevents loss of internal pressure from the duct.