Joined in 2023 
82 
63 About this deal
Elgato Game Capture devices such as the HD60 Sand HD60 S+have analog audio input ports. These devices can capture sound either via HDMI or the analog port. Both Game Capture HDand 4K Capture Utilitysoftware support analog audio capture from specific capture devices. The analog audio level can be changed in the software settings. Press the Xboxbutton to open the guide, then select System> Settings > General > Volume & audio output. Game Capture 4K60 S+can record to an SD card without requiring a PC. It is ideal for when recording video on the go or for recording high-quality 4K60 HDR video to an SD card when the PC is not powerful enough.
An advantage of this dongle is that it allows you to transmit at 4K at 30fps, should you need top resolution. And it also provides other resolutions include 1080p at 60fps. And unlike other solutions, this device offers low-latency - so that there is minimal delay in the live video image being transmitted. Cam Link Pro is a powerful video mixer engineered for Multicam production. Cam Link Pro equips you to capture four HDMI signals from cameras, computers, laptops, tablets, and more. Stream or record in 4K or 1080p60 Full HD, get independent source control in broadcast software, and add four cameras to video conferencing apps with Elgato Multiview. Unfortunately the Elgato Cam Link can be hard to find at the moment, as everyone is finding themselves in a world of FaceTime, Zoom and video conferencing. So there are some alternatives, such as Elgato's own HD60 S+ card (which is actually aimed at gamers, but can perform the same conversion task). Solution: Unplug the Elgato Game Capture HD hardware from the Mac or PC, and video source. Wait a minute, and then attach everything again.Can your camera be powered by an external power supply while outputting video, and while mounted on a tripod? Cold booting the PC means flushing the PC of all power, and then turning it on. This resets internal components. PCIe x16 slots are generally intended for use with Graphics Cards. PCIe 1x slots are generally for smaller add-in cards like Wifi Adapters, USB Adapters, or lower bandwidth capture devices such as HD60 Pro. If the capture device is receiving a resolution or frame rate it does not support the No Signalmessage may be shown.
Elgato capture cards have HDMI pass-through. This means the capture card has an HDMI input port, and a HDMI output port. The source needs to be connected to the HDMI in port, and the TV/Monitor needs to be connected to the HDMI Out port. HDMI 2.0 cables are much more susceptible to signal degradation due to the much higher data rate. HDMI 2.0 cables over 6 feet are not recommended. then Elgato Game Capture HD software can't fully communicate with the Elgato Game Capture HD hardware. This could be an issue with the USB connection, or some unusual error in the software or hardware.The PCIe generation refers to updated standards, enabling faster speeds. PCIe generations are denoted as PCIe 2.0, PCIe 3.0, and PCIe 4.0. As of the writing of this article, PCIe 4.0 is the latest generation. PCIe is a physical interface for connecting high speed devices such as graphics cards, network cards, storage adapters and capture device to a desktop PC. This is required when using the Chat Link cable. Learn how to use Chat link with Game Capture HD60 Pro here. When using Cam Link 4Kor Game Capture HD60 S+in OBS Studio on macOS, the audio capture needs to be set manually. Audio is not captured from capture devices automatically like in OBS Studio for Windows. Elgato Game Capture devices capture sound in stereo (2.0) format. Make sure the PlayStation 5 is set to output Linear PCM.
To record audio from a PC, the PC needs to output sound over the HDMI output of the graphics card. By default a PC can only output audio to one source at a time. For Elgato PCIe Capture devices, a full PC restart may be needed to finish a pending firmware update. If the update is not completed the capture card may not properly capture the incoming video signal. Elgato Game Capture devices capture sound in stereo (2.0) format. Make sure the PlayStation 4 is set to output Linear PCM.
Spotlight
To use headphones with the PlayStation 4 controller, a special cable was developed called Elgato Chat Link. Learn more about using Elgato Chat Link here. HDMI cables vary in quality and speed. Make sure to use the HDMI cable that came with your Elgato Capture Device. We hope this information has helped inform your decision about which capture card is right for you. OBS Studio will capture audio from an Elgato Capture deviceautomatically when it is added to a scene. If audio is not captured as expected, try these steps: Each of the four HDMI inputs functions independently - This means one HDMI input can have a 4K30 signal going into it, while a second HDMI input can have a 1080p60 signal going into it.
Like USB, PCIe is forward compatible. This means that a device which requires PCIe 2.0 will work in a PCIe 3.0 or PCIe 4.0 slot. Elgatooffers a comprehensive selection of capture devices, each suited to a particular setup. Below you'll find a summary of their features and suggested uses.
Still need help?
All Elgato Capture Devicescapture sound in the Stereo (2.0) format. The sound format must be PCM. Other sound formats, such as bitstream, Dolby Digital 5.1, DTS, Dolby Atmos, and others are not supported. The PlayStation 5 will not output sound over HDMI if headphones are plugged into the PlayStation 5 controller. The Game Capture HD software can capture the analog line-in sound from a desktop PC when using the Game Capture HD60 Pro or Game Capture 4K60 Pro (MK.1) capture cards. Multi App Support: use a single Game Capture 4K60 Pro MK.2in multiple software applications simultaneously, e.g., stream at a low bit rate with overlays and record a clean 4K60 HDR version.
Related:
Great Deal 
New Comment