Joined in 2023 
82 
63 About this deal
It’s easy to work this out yourself. Simply multiply your kitchen’s width, length and height in metres to get your kitchen’s volume in m³, and then multiply the result by ten. Make sure that whichever hood you choose has a flow rate that matches or is above that figure, as that will allow the hood to filter all the air in your kitchen at least ten times per hour. With the models here ranging from around 350m³/h up to 500m³/h, you will find something to suit all but the very biggest of kitchens. Anything else I should be aware of? The Cookology Integrated Telescopic Cooker Hood is designed to be fitted into a unit above the hob. The front section can be pulled out to extend the hood, revealing its controls and lights. You will also want to make sure that the cooker hood matches the width of your hob, so it can efficiently and effectively remove steam and smoke from all of your bubbling pots and pans.
You could easily spend a whole lot more on a kitchen extractor fan that won’t perform any better than this model. As long as you’re prepared to put up with the noise, the Zanussi ZHC62352X comes highly recommended. Extractor fans vary in their power consumption as they can be used for a variety of applications. As with all electrical appliances, an extractor fan will use electricity depending on its wattage and motor size. Generally speaking, however, most single-room extractor fans do not require a lot of energy and will typically draw between 5 and 240 watts (sometimes higher if industrial), depending on their type and the power required for their operation. Additionally, some models also come with energy-saving settings that provide lower operational costs. Key Specs – Type: Extraction and recirculation; Canopy size: 60cm; Extraction rate: 368m³/h; Noise level: 47dB Chimney cooker hoods are bulkier in design but can offer a traditional, charming look with their large flues - available in a range of designs to suit all kitchen interiors
Share this article
A built-in range hood is a necessity for modern kitchens, but installing one into an older house or an existing building that perhaps wasn’t designed for cooking is a big task. Poor ventilation while cooking can set off smoke alarms, let odors linger, cause grease to build up on surfaces, and worst of all, lead to a wide range of potential health problems. Kitchen extractor fans, while perhaps not the most glamorous or exciting part of your dream kitchen planning process, are an essential. As our kitchens fill with steam from boiling pots and the smell of fried onion and garlic, it's important we have a way of clearing the air of steam, grease, odours and smoke. By doing so, we're also looking after our kitchen's interior by limiting a build up of condensation.
Chimney cooker hoods: These are made up of a canopy hood and a chimney. They are usually wall-mounted and are a great option for large hobs. Related: Best Air Purifier for Small Bathroom What is the difference between an extractor fan and an exhaust fan? Extractor fans are electrical devices used to remove stale or polluted air from a room and supply fresh outdoor air into the space. They are especially useful in bathrooms, kitchens, and even laboratories that have higher-than-normal levels of humidity, smoke, fumes, and other airborne contaminants. Extractor fans can also be used for ventilation purposes as well as to reduce condensation. In short, extractor fans help maintain a comfortable indoor environment by removing excess moisture and pollutants from the air. You can find more Smeg kitchen appliances in our roundup of the best toasters on the market. What is the difference between a cooker hood and an extractor fan?The perfect solution for those who want a value-for-money extractor hood that can be hidden from view when not in use. Downdraft cooker hoods ooze contemporary style - the swanky kitchen devices are built in to your countertop, or kitchen island, and rise up at the touch of a button. Perfect if you want your extractor fan out of sight when not in use As important as ventilation is in the kitchen, it’s something that’s often not up to scratch. French designer Maxime Augay has now launched the AirHood, a portable range hood that can sit on a bench and efficiently pull grease and smoke out of the air. Cooker hoods are the most popular way of building an extractor fan into your kitchen, or you can opt for a smaller individual extractor fan that sits within your kitchen wall if you'd prefer. For more on the difference between the two, jump to our short kitchen extractor fan buyer's guide.
This hood couldn’t be easier to use – tap the fan speed button of choice and, well, that’s it. On the far right, there’s another button to turn on the two ultra-bright 4W LEDs. If you would rather go down the simple route and avoid having holes drilled into the wall, perhaps consider a recirculating model like this fine canopy example from the house of Bosch. The Serie 2 simply mounts to the wall above any 60cm hob (cooker style or integrated) and recirculates cooking vapour through its charcoal filter at a rate of up to 350m³/h. Downdraught extractor: Fairly new to the scene, they slot into your base units and lie flush with the top of your worktops, rising up when needed. You can rarely go wrong with a Bosch and this one’s a case in point. It performs the task of expelling air without sounding like an aircraft, and it looks extremely elegant while doing so. All cooker hood manufacturers recommend a minimum distance of 650mm above a cooker hob if it’s electric (induction or ceramic) and a minimum of 750mm if it’s gas. Bear that in mind if your kitchen has a very low ceiling. Thankfully the majority of extraction cooker hoods come with a telescopic chimney section that can be expanded or contracted to fit the exact height of a ceiling.There are several different types of kitchen extractor fan and the one you choose needs to suit your kitchen as well as the type of hob you will be using it above. Here we explain the various styles of cooker hood to help you make the right choice. Extractor fans and exhaust fans are the same things. The term “extractor fans” is used more commonly in the UK, whereas “exhaust fans” is used in the US and around the world. Does an extractor fan use a lot of electricity?
Aside from a portable fan, if you don’t have access to a good bathroom extractor fan, you can ventilate the bathroom by leaving a window open (unless you don’t have a window). In addition, if your window doesn’t have enough ventilation, you can also invest in a bathroom air purifier that will filter out humidity and unpleasant odours from the air in your bathroom. Or even What are the Top 10 affordable (best budget, best cheap, or even best expensive!!!) Portable Kitchen Extractor Fan available? Etc.Integrated cooker hoods: Also known as 'built-in', these are designed to fit into a kitchen unit above the hob and are a good space-saving option.They're a great option for those who do not like the look of cooker hoods. Here at Homebuilding.co.uk we like to get our hands dirty and trial as many products as possible, but in the instances where we aren’t able to, such as with the best kitchen extractor fans, we leave no stone unturned to provide you with the crucial information you need to know before buying. While kitchen extractor fans tend to be smaller, and much more straightforward to buy, cooker hoods come in all shapes and sizes: We've included a number of cooker hoods - including chimney, glass and visor designs - as well as individual extractor fans in our roundup, so you can find a suitable fit for your kitchen's interior style and layout. Integrated extractor fans are hidden by kitchen cabinets so they're a great option if you're all about a stylish kitchen with a uniform design.
Great Deal 
New Comment