Zinsser Perma-White Interior Matt Mould Resistant Paint 5 Litre

Product Information

Zinsser AllCoat Exterior (Water Based) products have a coverage rate of 12m² per litre/per coat.Zinsser Perma-White Interior has a coverage rate of 10m² per litre/per coat so slightly less. You can however use theZinsser AllCoat Exterior (Water Based) products for interior applications if you wish as well as exterior ones. Zinsser Perma White Mould Resisting Paint (Matt Finish) is a water-based paint specifically designed to withstand the harsh conditions of moisture prone areas in your home. Its unique, safe ingredients prevent mildew and mould growth on the paint film even under the harshest conditions. We would advise priming the clean melamine surface with a coat of Zinsser B-I-N first followed by 2 coats of Zinsser Perma-White Interior. This will give much better adhesion. Assuming the previously painted doors are clean, dry, sound and prepared as detailed in the Technical Data Sheet we can recommend Zinsser Perma-White Interior.

Zinsser Perma White Self-Priming Interior Paint Satin White 2.5L Zinsser Perma White Self-Priming Interior Paint Satin White 2.5L

Clean surfaces with a solution of one-cup household bleach per gallon of water or a quality biocidal wash. Zinsser Perma-White Interior Satin Paint – if you are after a glossier finish rather than a dull sheen, Perma-White Satin Interior Paint will be the best choice. We recommend using this particular finish for areas that are subject to wear and tear. Due to its moisture resistant properties, Perma-White Satin Paint will be ideal for bathrooms and laundry rooms. This is a common problem. It is likely the paint used previously is allowing moisture through to the plaster walls and ceiling causing the flaking, i.e. loss of adhesion. During winter the plaster has been absorbing moisture leading to the flaking problem. The ceiling will need to completely dry out before any painting is carried out. Leaving windows and the bathroom door open as much as possible, minimising use of the shower etc will help speed up the drying out process.Not only homeowners but also hotels, motels, nursing homes, schools, hospitals, health clubs and gyms find in Zinsser Perma White Mould Resisting Paint what they have sought for years: a finish for bathrooms and other high-humidity areas that stay mildew and mould free, good-looking, bright and colourfast for years. Coverage approximately 10 square meters per litre. Coverage will vary according to surface profile and porosity. Patch prime all stained, bare and filled areas with one coat of Zinsser B-I-N Primer Sealer in accordance with the manufacturer’s instructions. Allow a minimum drying time of 45 minutes in normal drying conditions. The first coat primes and seals the surface, providing a base for the topcoat. The topcoat completes the sealing process while providing additional moisture resistance and protection. This paint is ideally suited to exterior buildings with timber and metal cladding. As the doors are previously painted we would advise testing for compatibility and adhesion prior to full application. Soluble in the following materials: cold water and hot water. Very slightly soluble in the following materials: methanol and acetone.

Zinsser Perma-White Interior Matt | Dulux Decorator Centre

Zinsser AllCoat  Exterior is an ultimate performance, mould resistant paint that offers supreme protection to all exterior surfaces: wood, metal, masonry, plastic, concrete and cladding. It forms a vapour-permeable, low maintenance, water-shedding coating that is recoatable in 1 hour. The matt finish does provide a long lasting protection against mildew and mould, but the satin finish will stand up better to areas exposed to wear and tear, it also has better moisture resistant properties. Non-explosive in the presence of the following materials or conditions: open flames, sparks and static discharge and heat. No unusual hazard if involved in a fire. Dispose of contents and container in accordance with all local, regional, national and international regulations.Zinsser Perma-White Interior will be fine for this application. The substrate must be completely dry, remove unsound paint and wash down to remove soap/ shampoo splashes.If there are any bare areas these can be primed with Zinsser Peel Stop then apply 2 coats of Zinsser Perma-White Interior. Restrict use of shower for first 5-7 days to allow the paint to fully cure. To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1. If product has dried on application tool, soak it overnight in a solution of equal parts household ammonia and water. Follow manufacturer’s instructions when cleaning spray equipment. Use Zinsser BIN Brush Cleaner to removed dried paint from brushes If thinning is necessary (such as with conventional sprayer applications), use only water and no more than 10% by volume Zinsser Perma-White Interior would be an excellent choice and is available in nearly any colour (not just white), see our blog post How to Paint Over Mould for more details.