Joined in 2023 
82 
63 About this deal
Add the curtain rod on the adhesive hooks and see if it all holds well. A bit of trial and error might be needed here. However, if you made the right measurements, you should be just fine. Still, it’s important to test out everything before you install the curtains. Hanging Heavy Curtains without Nails Make sure the hook is positioned properly. The tip of the hooked portion should curve upward while pointing downward. If you can’t locate any Command hooks for curtain rods, buy the biggest one you can find with the highest weight capacity. No matter how many hooks are used, the aggregate weight of the curtain and rod cannot be greater than the weight value of ONE hook. Make sure the hook portion can accommodate the rod.
Why should you hang curtains without drilling holes? There are many reasons why you may want to go down that route. First, it’s a very simple way to hang curtains and you can do it yourself without calling a professional. As of my knowledge cutoff in September 2021, Command strips are designed to hold various weights depending on the specific product and size. Generally, the heaviest weight capacity for Command strips ranges from 5 to 16 pounds (2.3 to 7.3 kilograms) per strip. How to Hang Curtains with Command Hooks. Don’t remove the hook itself. Only the rectangle or oval to which the hook is fastened should be clipped.
Returning your item
When using command hooks to hang curtains, you’ll want to choose a curtain rod that matches the width of your window or the space you want to cover. Measure the width of your window or the area where you want the curtains to hang and select a curtain rod that extends to that width. Make sure the rod is compatible with the command hooks you plan to use and fits securely within the hook’s dimensions. Q: How do you hang curtains without a curtain rod? There are some brands that create curtain rods which tap behind the wood trim of your window. Then you will be able to install the curtain with ease. It’s actually a very convenient system and it works incredibly well. It might require a bit of adjustment based on your window size, but for the most part it’s really convenient and simple to use. Follow these instructions on how to hang curtains with command hooks. Get all the supplies together first. Then, clean a rectangular area that now extends 3 to 6 inches (7.6 to 15.2 cm) on either side of the frame and 4 to 6 inches (10 to 15 cm) above it. To do this, dab a soft cloth or paper towel with rubbing alcohol. Next, use the command hooks with sufficient force to ensure proper adhesion to the cleaned area. Attach the curtain rod to the Command Hooks to complete this. After that, simply hang your curtains from the rod. This technique offers a simple and damage-free way to hang curtains in your living area.
You can use tension rods or adhesive hooks to hang curtains without drilling the wall. Q: What size curtain rod do I need for command hook?These instructions will help you how to hang curtains with Command Hooks securely, evenly, and without causing any wall damage. 4: If the hooks’ tops are excessively lengthy, cut them down. You just need to press on the hook for around 30 seconds or a bit more, just make sure that you remove the adhesive strip first just to be safe. Once you installed the adhesive hook, you should let it dry for around half an hour or more. The real hooked portion will show up against the curtain rod if you paint the complete hook to match your wall. By leaving the original color on the hooked portion, you can assist it in merging into the rod. Cut a length of masking tape, and then wrap it around your Command hook’s hooked portion. Reaching the rectangle or oval to which the hook is fastened will cause you to stop. This is How to Hang Curtains with Command Hooks. 3: Apply paint primer made for plastic surfaces to the hook. Where you placed the pencil marks on the wall, place your Command hook there. Use a saw, dremel, or bolt cutters to trim the top of the hook if it is in the way and rubbing against the ceiling, crown, or molding. The hooks are prepared for usage once the paint has dried and sealed. Since they are not frequently used, there is no need to seal them. Sealing the hooks could actually damage any metallic surfaces.
hold two hooks. For curtains broader than the frame to offer enough support, place them 3 to 6 inches (7.6 to 15.2 cm) outside the frame.
In addition, you’re not making a huge mess. You retain the integrity of the wall by not drilling, and the results are still great in the end. This is the best of both worlds, and the outcome is very exciting because of that. You just need to measure and then use the hanging method that suits your needs. Make sure to pull the tape away from the hook in a straight upward motion. You run the danger of chipping the paint if you drag it across the painted portion of the hook. If there are any paint chips, fill them in with little extra paint and a small, pointed brush. This is How to Hang Curtains with Command Hooks. 6: Give the paint time to dry if necessary. Command strips can be strong enough for lightweight curtains but may not support heavier curtains securely. Follow weight limits and consider traditional curtain rods for heavier curtains. Q: How can I hang curtains without drilling the wall?
Great Deal 
New Comment