Joined in 2023 
82 
63 About this deal
K1 – 0.2 Ohm Quadruple Coil Build ( 4 stable heating coils in parallel with good airflow give denser clouds and purer flavour 80-130W – Best: 90-120W)
Then when getting into the RPM Pod, here we will find more options, but the best in delivering both flavour and cloud production, is the RPM 0.4 ohm Mesh Coils , which is also included in all the devices box. If you tried it and wanted to see all options, then you should go for the Triple 0.6 ohm Coils . SMOK S Series feature lower wattage coils, perfect for use with lower wattage devices. These coils feature a mesh option or a quadruple coil build.The Smok A coil range feature mesh coil builds, with a coil resistance of either 0.17 Ohm, 0.2 Ohm or 0.15 Ohm, and are available in a range of colours for a real statement piece. Due to the sub-ohm coil resistances, we recommend using with liquids of 60% and above for best results. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength. NEVER FORGET TO PRIME YOUR SMOK Mini V2 S2 Coils – SMOK TFV8 Baby V2 Coils ! Then when we get to the RGC Pod, the only option currently available is the RGC 0.17 Ohm Mesh Coil . Yes, currently it is the only one available, but it's also the best coil overall that you can use with any of the RPM80 devices, due to the massive cloud production, and not to mention the impressive flavour that provides when using High VG E-Liquids. These Smok coils have a threaded base meaning you have to screw them in when installing a new one into your tank. The threads along with rubber o-rings prevent any leakages that you could experience. In general, the range is designed for sub-ohm vaping using 70% VG E-liquids. Again here we have quite an option, and actually most of those coils are pretty good for Sub-Ohm vaping. The best ones are the Prince Strip coils and the latest P-Tank Max Mesh Coils 0.17 ohm . The Strip Coil has great flavour and tends to last longer than your average coil, due to it’s Kanthal wire. The best overall performance wise, is the P-tank Max Mesh, superior over all in flavour and cloud production. This is the latest coil that Smok has released for this tank.
Compatible with TFV8 Baby V2 Tanks as used in the SMOK Species . These coils are not compatible with either the SMOK TFV8 Baby tank or SMOK TFV8 Big Baby Tank All coils available are compatible with Sub-Ohm vaping. The main 2 coils I would like to mention are the Mini V2 A1 Mesh Coils , which is probably the most reliable if you like to vape at higher wattages (40-100W), and are best used between 60 to 80W. Otherwise, if you prefer more of a standard 40W vaping power, I would recommend the V2 S1 Mesh Coils , which are best used between 50 to 70W.Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they’ll require more power to use properly, which will be provided by an advanced vape kit. When talking about the Nord Pod, if we are using Nic Salt E-Liquid, a mentioned previously, we recommend the Nord 0.8 ohm Mesh MTL Coils l, and if we are on purebase nicotine e-liquid, we definitely recommend to go for the Nord 1.4 regular or ceramic. The main difference between the two, is that the ceramic is really silent, and gives a smoother hit compared to the regular, which will get hotter than the ceramic and uses slightly more juice. SMOK K Series feature Quadruple or Octuple coil builds, offering large vapour and flavour production. The Smok S coil range focuses on lower wattage devices with resistances of 0.15 Ohm in either a single mesh coil build or a quadruple coil.
If you are looking into coils for pure base nicotine ejuices, then there’s no doubt, the Quartz 1.2 Ohm Coil is the best for you, as it runs at 12W, and any other coil will not deliver a similar throat hit. Which Smok Nord Pod / RPM Pod coils are best for Direct To Lung? Although being around for some time, the Nord Vape Kit is quite popular as a device, and has many users. The coils available for this device are the following: SMOK A Series all feature mesh coil builds, offering fast ramp up times and a larger heated surface area, for increased vapour and flavour production.For Sub-Ohm we will definitely recommend the Nord 0.6 ohm Mesh Coils , as they tend to last longer than the other coils available, and produce the most could and best flavour. All these devices, RPM 40 , Fetch Mini and Nord 2 pod kit, run on the same compatible coils, which are the Nord coils (for the original Smok Nord), and the newly implemented by Smok, the RPM Coils. Please see all coils available for those devices below: The Smok Prince has been quite popular in the past years among the market, therefore i decided to cover them too, as the users are still out there. Please see all the available Prince coils below: These are the replacement coils for the: SMOK R-Kiss kit, Smok X-Priv kit. Smok Species 230W or Smok Mag Grip kit etc. SMOK Mini V2 S2 Coil Specification
The latest and perhaps most advanced in the family of Smok’s Pod Mods, we find the RPM80 and the RPM80 Pro . Both with the similar features among one another, the difference stands on the battery type, where the RPM 80 adopts an internal 3000mAh battery, the RPM 80 Pro has an external 18650 battery (Not Included). They both can run RPM coils and the latest release, the RGC coils. Please see the coils available for the devices below:
When talking about MTL, there’s 2 coils that are suggested to be used with these devices. The first one would be the RPM MTL DC 0.8 ohm for nic salts e-liquids, and the Quartz 1.2 Ohm Coil for pretty much all 50/50 or high PG liquids. Which Smok RPM80 coils are best for Direct To Lung? Smok Mini V2 coils, designed for the TFV Mini V2 tank. The coils come with low resistance, a high surface area and anti-bacterial cotton. Ideal for vapers who are looking to create clouds of vapour without sacrificing flavour. Once you have changed your coil it is important to prime the newly installed coil to avoid burning the cotton prematurely. This involves filling the tank completely with E-Liquid and leaving it to soak in to the new coils cotton before vaping. You should leave the newly filled tank for around 6-8 minutes before use. This is the tank that came out with Smok’s new generation of vape kit devices which are the Smok Species, Morph, Kiss, D-Barrel, S-Barrel, Mag Grip, Mag P3 and the Smok 80W kit. Please see below which coils are available for these devices: The Smok K coil range, features quad (4) or octo (8) coil builds in 0.15 Ohm and 0.2 Ohm resistances. In the case you are on Nic Salt, you can go for the Nord 0.8 ohm Mesh MTL Coils , as they are the best one due to the mesh coils. If you are on pure base nicotine, then you have a few options based on what you are after. If you like a smooth hit, then you should go for the Nord 0.8 ohm DC MTL Coils , but instead if you like a strong throat hit from your device, then i'd suggest trying the Nord 1.4 Ceramic Coils , or using the Nord 1.4 ohm Coils that have been included in the box with yoru Smok Nord Device. Which Smok Nord coils are best for Direct To Lung?
Great Deal 
New Comment