276°
Posted 20 hours ago

Spark Plug Helicoil Kit, Carbon Steel Motorcycle Spark Plug Thread Repair Kit Spark Plug Re-thread Tap Tools with Inserts for 14mm Sparking Plugs Repair hand operated tools

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Don’t just try using a thread chaser when a spark plug blows out. There has to be enough material to chase (or tap) and the simple fact that the spark plug blew out indicates there’s damage already done and material missing. After a plug blows out, chasing the threads and re-installing almost always ends up in a repeat blowout. Don’t work on the spark plug hole without first making sure the valves are closed. Open valves can be damaged by tooling and when blowing shavings out, open valves can allow debris further into the engine. Don’t drive the vehicle with a spark plug blowout or with leaking compression from a parts store insert. More damage can possibly be done. In emergency situations we have heard of driving short distances without a plug if the coil and injector for that cylinder is unplugged. This should be avoided if at all possible. Answer - Yes, we have options for bigger repairs that accept the original size spark plug. See the kits listed above for more info or give us a call for assistance in choosing the correct kit at 800-734-8665. TIME SERT 5553 - O.D. (Outside Diameter) of the Big Sert is .70 and this kit does repairs up to .66".

Don’t resort to using a parts store repair. Yeah, parts stores have repairs readily available but in our experience they are just temporary repairs that end up making holes bigger. Then an oversize repair is needed to clean up the mess. Parts store kits that commonly fail are Dorman, Helicoil and Save- Thread. Any that include “self tapping” or striking from the top are likely to fail sooner rather than later. If you’ve already used one of the temporary kits we most likely can still help. Don’t use anti-seize on the spark plug. Using anti seize will affect the torque specs because the plug will turn much easier. Read instructions carefully before doing the job. We also include extra tips upon request when purchasing certain kits from us.The Heli-Coil ® Sav-A-Thread ® HT kit is a professional spark plug thread repair kit that is typically used in 4.6 and 5.4 liter Ford ® engines, and offers the highest quality and most durable repair available to permanently restore stripped spark plug hole threads. Multipurpose Inch & Metric Kits CAL-VAN 38900 This is a less expensive kit that can be used in many 4.6, 5.4 and 6.8 Liter engines. Insert measures .73". The lip measures .85" which can help seal in some cases. The largest hole that this is recommended for is around .68". TIME-SERT 5600 O.D. (Outside Diameter) of largest insert is .77". Time Sert 5600 has been used when Calvan failed due most likely because a thread adhesive was not used. Or was incorrectly applied. The largest the hole that this repairs is around .73. The M16 x 1.5 Heli-Coil ® Sav-A-Thread ® kit is a professional spark plug thread repair kit that is typically used in 4.6 and 5.4 liter 3 VALVE Ford ® Triton ® engines from 2004 to 2008, and offers the highest quality and most durable repair available to permanently restore stripped spark plug hole threads. Sav-A-Thread ® HT Thread Repair Kit

Restore stripped threads easily and permanently with Heli-Coil ® thread repair kits and master sets. Heli-Coil ® application-specific thread repair kits make complex repairs manageable and are often the recommended solution by both domestic and foreign automakers. Heli-Coil ® inserts are available in thread repair kits and sets for permanently repairing tapped holes which have been stripped or damaged due to wear, corrosion, and overtorque. Kits are available in inch, metric, spark plug, and pipe thread series. All kits have a quantity of inserts, the proper size drill, high-speed steel Heli-Coil ® tap, and installation tool. Answer - Usually Helicoil brand thread repair kits entail tapping threads, installing a wire coil or insert. If installing an insert the last step is striking the swedge type tool on top of the insert with a hammer! Read more in our Helicoil VS Time Sert article.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment