Adey New 0057246 Pro2 Magnaclean Professional 2 Magnetic Cleaner 22Mm

Product Information

Consequently the filter needs regular cleaning as it attracts the sludge to it. This is done during an annual boiler service but it is something you can do yourself. If you don’t have a MagnaClean Filter installed, then get in touch and we can arrange for one to be installed on your current boiler. The MagnaClean consists of an inner magnetic core. This core is an exceedingly strong magnet that attracts the metal particles that exist in the water that circulates through the boiler. You can watch a video about how the MagnaClean works here How to Clean a MagnaClean Filter – Tools Needed The Adey MagnaClean Professional2 has been expertly designed to protect your home's central heating system by maximising the capture of magnetite and trapping virtually all circulating debris.

You might need to remove the nut from the return valve on the boiler to remove the pipe first if there’s no movement in the pipe. Whether you’re fitting a MagnaClean Professional2® on a brand-new boiler or retrofitting it on an existing boiler, get the installation right to give the boiler the best protection. MagnaClean Professional2 is a proven, high efficiency, full-flow, a magnetic and non-magnetic filter designed to protect domestic heating systems.Use the provided tool to twist the cap off, then lift the central core out. Step 3: Clean the Outer Sleeve Here is my Adey Magnaclean Pro 2 installation guide with photos from a filter replacement job of mine on an old and leaking Fernox TF1 filter. There are two nuts on the Magnaclean vales and two nuts on the compression coupler if you used one. Magnaclean valves and extra pipe being fitted

MagnaClean is a magnetic filter, a component that can be fitted a boiler's pipework to collect any rust, sludge or debris from the circulating water before it has chance to build up and reduce the efficiency of the heating system. The difference lies in the size of the filter’s body. The bigger the body of the filter, the more heating sludge it will catch. Once a filter is full, it can no longer catch any more heating sludge. As the Micro is a smaller bodied filter, we’d always suggest going for the Pro 2. Where To Install A MagnaClean Magnaclean installation instructions can be found in the leaflet that comes with Magnaclean filters. The whole MagnaCleanse process can take as little as 2 hours to complete from start to finish but can help your central heating system for a long time to come, resulting in: Visit Water Treatment in Heating Systems to consider all of your options when it comes to keeping your system free from sludge. Benefits of a MagnaCleanse

Online Reviews

The flow on the boiler is hot, but the return is cold (water isn’t passing through the heating circuit correctly) Fit the new Magnaclean filter by fitting the safety clamp first then push the filter onto the connections. Do a test run of your system and make sure that your Magnaclean is doing its job without any problems or hassles. There you ave it! Unlike a MagnaClean, a MagnaCleanse is only fitted temporarily while the engineer clears the system of any debris. To do this, an agitator (VibraClean) is held against the outside of the radiators for up to 30 seconds to loosen up the deposit so that it flows round to the MagnaCleanse and can then be disposed of. Having drained the system, it's possible to install MagnaClean Professional2 in two minutes saving installers considerable time trouble.

If there’s a gap then you will need to add some pipe using the straight compression coupler like I had to on this job.Hold the filter in position on the pipe where it’s going (preferably on the return pipe close to the boiler) and mark the pipe where they sit in the valves To mark it you will need to work out how far in the valve the pipe sits and mark the valves on the outside with a marker. Before installation, it's recommended that ADEY MC3+ Cleaner is sent around the pipes to loosen any existing deposits. After installation, you should use MC1+ Inhibitor, a chemical liquid the dose of which should be monitored regularly, ideally during an annual service. Cut the section of pipe out with a 22mm pipe cutter (possibly 28mm but I haven’t fitted one this size) Adey is a UK manufacturer and supplier of domestic and commercial filters, chemicals and scale reducers for heating systems. Highly efficient, durable and eco-friendly, Adey’s products can be found in more than five million homes in the UK and Ireland, making them an extremely popular choice.

If you have a Magnaclean leaking, then most of the time it is because of the rubber O-ring that sits inside the lid. This can be hard to see and remove but if your Magnaclean is leaking then you should replace this O ring. annual saving on heating bills (*For a typical three-bedroom property based on independent research) Please feel free to get in touch if you would like a boiler service, which includes cleaning your MagnaClean Filter.

Sorry

A MagnaClean filter is usually fitted as part of a boiler installation and keeps the boiler free of sludge build up by attracting metal particles in the water that circulates in the system. And to help keep the filter performing as powerfully as the day it was fitted, service it properly. To do both, simply follow our guide.