PacTool SA90376 Gecko Gauge LP Siding Mounting Block - Compatible with 7/16-inch Siding : Everything Else – 7/16” Siding

Product Information

Start by measuring the entire area you’d like to cover. Decide if it will be better to install the panels with the long side horizontal, or vertical. Work from bottom to top, so that the boards on rows 2 and above will have row 1 to rest on while you shimmy them into place. Cutting around windows and door frames is pretty straightforward. Use the tape measure to find out where the cut needs to be made, and use the framing square to accurately trace where the cuts need to be made on the corresponding piece of siding. Try to make these cuts as tight as possible. Although the painters will caulk the small gap between the end of the siding, and the corner trim, craftsmanship always wins and it will only help while striving for a water-tight finish. How to Install 4×8 Hardie Board Siding

For distances longer than the length of your siding (typically 12 feet) you’ll need to butt two pieces together at a stud. Some experts recommend leaving a ⅛” gap in between boards, but I don’t think this is necessary. This is good practice for real wood material due to its tendency to absorb moisture and expand. A quality fiber cement product will not swell enough to do any damage. I like to butt them as close as possible because a good painter can hide the seam with caulk. Pactool: Trusted brand for decades – leaders in specialized construction, renovation and remodeling designs Like any substantial project, you’re going to have times when you’re tired, you’ve been working all day, and looking at the area left to do is daunting. That’s Okay! After flipping my first house, this was probably one of the most important lessons I’ve learned. Most manufacturers offer a 4×8 panel option for fiber cement siding, often used for vertical siding. The installation process is similar to installing drywall, however these panels are heavy, and difficult to manage by yourself. Siding – most suppliers carry Hardiplank, but ask if they carry another brand that may be cheaper. I personally used Nichiboard and it worked out to be a 30% savings as opposed to Hardie plank.Material: Choose a material that is strong enough to hold up against wind, rain, snow, and other weather conditions. Metal is usually the strongest option, but plastic can work for lighter materials like vinyl or fiber cement. Fiber Cement siding is a combination of cement, water, sand, and cellulose fibers. The combination of these compounds provides a strong, long-lasting option for a home’s exterior. Another benefit of fiber cement is the ability to hold paint. Due to its porous nature, the material soaks up paint when applied. Tests have shown that paint also withstands fade from UV rays on fiber cement siding better than it would on other siding materials. Make sure that the clamps are both set to the same level of reveal that you desire. Most of the time homeowners want a 7.25”-7.5” reveal, so play around and find what you like.

You’ll find that these boards are flimsier than they seem to be, so you don’t want them to span a distance larger than 16″ without hitting a stud. Step 5 – Install the Rest

Cable Clamp on Adhesive Base

Start at the highest point you can, and pry the old siding off from the top down. Make sure to remove ALL nails. The last thing you want is to find out you missed a nail after setting a new hardie plank panel into place. Step 2 – Install House Wrap DIY Projects: Get rid of bulky spacer guides with these durable clamps; machined from industrial-grade components for years of use House Wrap – These come in large rolls measuring 9 feet long. You’ll need to shingle this after you tear off the old siding. (Shingling just means overlapping starting with applying the bottom first so that rain can’t run down into a lower layer) Toggle Clamp: Add safety and stability to any panel siding job with these sturdy metal clamps, allowing one-person installation and securely clamping onto Z flashing for a steady platform

A: Yes – it works with all fiber cement panel sizes while creating consistent gaps between panels allowing moisture drainage as per manufacturer guidelines. LIFTING TOOL: Our gauges can be adjusted at 1/4-inch increments for 4 to 8-inch siding reveals. The patented Friction-Cam mechanism has the superior holding power to fully support 16-foot LP siding lengths, ensuring equal spacing between each board. A: Simply attach each Z clamp to the first course of flashing before placing the panel on the support plate – then nail as per manufacturer recommendations before continuing up the wall. Size: Make sure you buy the right size clamp for your application. If the clamp is too large or too small it wont be able to secure the siding properly.Siding Nails– These can vary, but the standard is a 2.5” siding nail. If you’re unsure of what nails you’ll need, ask someone in that department. A: The patented friction cam mechanism allows this tool to fully support 16 foot lengths of LP Siding ensuring equal spacing between each board. Installation: Make sure you buy a type of clamp that is easy to install on your particular type of siding. Adjustable clamps can often make installation easier by allowing you to adjust them to fit any size material without having to drill holes or make other modifications.