About this deal
The operating humidity shows the acceptable level of humidity, in which the display will function flawlessly. It sets a lower and an upper humidity level for safe operation and is measured in percentage.
Percentage luminance drop at 35 degree horizontal angle from the centre of the screen with 100% white output Max light output HDR (high dynamic range) while displaying a live scene and white square taking up 10% of the screen (measured in Nits)Percentage Luminance drop at 35 degree horizontal angle from the centre of the screen with 50% white output Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality. The ratio between the horizontal and the vertical side of the display. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10. Max light output HDR (high dynamic range) while displaying small white square taking up 10% of the screen (measured in Nits) The percentage of the approximate area, taken by the active part of the screen, to the total front area.
Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases. The storage humidity shows the lower and upper humidity limit, which ensures safe storage of the display. Storing it outside these limits might damage the display. Max light output HDR (high dynamic range) while displaying a live scene and white square taking up 60% of the screen (measured in Nits) Approximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen. Ergonomics Information about the ergonomic functions - height adjustment, swivel angles, tilt angles, etc. VESA mountThe most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively. Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches.