CarPro Hydro2 Lite Touchless Silica Spray Sealant 1 Litre

Product Information

To return your product, you should mail your product to: Clean and Shiny (UK) Limited , Unit 1 Redan Hill Industrial Estate , Aldershot , GU12 4SJ, United Kingdom HydrO2 has an extremely good cost/performance ratio. With only 40ml of product required to complete an average size sedan, including all paint, glass, trim and wheels.

Do not apply HydrO2 in the sun or to a hot surface! Applying in direct sunlight will lead to streaks that do not wipe off easily. CarPro Reset is specially formulated to be used as a maintenance wash solution for nanotech coatings and sealants. CarPro HydrO2 can be used on all surfaces from Paint, Glass, Plastic, Wheels to Brake Callipers and will leave a highly water-repellent coating that protects the surface from every day contamination as well as most acids & alkaline solutions, whilst at the same time offering significant UV Protection.HydrO2 is not designed to be used in direct sunlight, or on any surface that is hot. Your work area needs to be in complete shade, and the panels of your vehicle should be cool to the touch before using HydrO2. This will ensure the product is not drying on the surface before you can rinse it, thus eliminating the risk of streaking in this situation. Using Too Much Product Less wiping: With no more wiping and buffing waxes or sealants on and off the paint there is less chance of scratches. Immediately rinse well with strong water pressure to produce agitation on the surface and create a well formed coating. Dilute 1 part HydrO2 to 6-10 parts water. A spray bottle is suggested for fast and easy application. Derived almost entirely from natural, organic and biodegradable ingredients; free from the harsh sodium and lauryl sulfate derivatives found in many shampoo products.

CarPro HydrO2 is a revolutionary sealant that allows you to protect paint, glass, metal, plastic, and nearly any other surfaces without wiping, buffing, or rubbing. This touchless sealant is a breeze to use when done correctly, however there are many scenarios that may lead to issues such as streaking. In this article I will discuss some of the more common user mistakes made when using CarPro HydrO2 so that you will be better prepared to use this product properly and have a more enjoyable experience. Working in Sunlight or on Hot Surfaces

Do NOT apply HydrO2 in the sun or to a hot surface! Applying in this manner may cause streaks that do not wipe off easily. CarPro HydroFoam is a pH Neutral surfactant designed to gently lift and remove dirt from solid surfaces in both a safe and effective manner. CarPro HydroFoam was designed with a special lifting lubricant that not only allows the dirt to be lifted from the surface but also provides a lubricant to safely wash the paint when used as directed. In the tradition of our Hydro2 line, CarPro HydroFoam was formulated with Hydrophilic glass fibers, fluoropolymers and can be applied to most solid vehicle surfaces! Spray fine mist of diluted HydrO2 on no more than 1/4 of vehicle before rinsing. Very little is needed and no overlap is needed. Working on a third of the vehicle at a time (while it’s still wet), spray a fine mist of HydrO2 directly onto the surface.

Introducing the incredibly easy to use, effective, and revolutionary TRUE WIPE-LESS spray sealant! CarPro HydrO2 is formulated with Hydrophilic glass fibers, silicon polymers, and fluoropolymers and can be applied to all vehicle surfaces! Paint, glass, plastic, convertible tops, wheels, calipers, and wheel wells are all easily within reach with HydrO2 Lite. HydrO2 Lite was specifically formulated for the DIY guys looking to get the insane gloss and incredible self cleaning effect offered by Hydro2! This amazing ready to use coat forms an ultra-water-repellent coating and is applied by simply spraying and then rinsing off with only water! Introducing the incredibly easy to use, effective, and revolutionary true wipe-less spray sealant! CARPROHydrO2is formulated with hydrophilic glass fibers, silicon polymers, and fluoropolymers that can be applied to all vehicle surfaces! Paint, glass, plastic, convertible tops, wheels, calipers, and wheel wells are all easily within reach withHydrO2.HydrO2was specifically formulated to save time and money for all the professionals and enthusiasts alike! This new innovative coat forms an ultra-water-repellent coating and is applied by simply spraying on and then rinsing off with only water! HydrO2 is meant to be applied and then immediately rinsed away using a strong stream of water. In ideal conditions, the product should be rinsed from the surface no more than 1 minute after you have started applying the solution to the panel you are working on. Ideal conditions consist of low humidity, moderate temperatures, and a cool surface. Since many of us will be using this product in warmer environments with potentially high humidity, it is important to remember to rinse the solution from the surface right away. I recommend working on only one panel at a time, beginning with the horizontal panels (roof, then hood, then trunk) and then working your way around the vertical panels. Mist a small amount of product onto the panel, and immediately rinse away (usually within 30 seconds from the time you started applying). There is no reason to let the product dwell on the surface. Also, remember to thoroughly soak the panel before application. Incorrect Dilution of Product with Water This new innovative coat forms an ultra-water-repellent coating and is applied by simply spraying and and then rinsing off with only water! You no longer have to wipe the surface dry. In shaded location shop wash your vehicle and remove any dirt from the surfaces. (For best results use CARPRO Resetor Iron X Snow Soap).Hydro Foam was formulated with hydrophilic glass fibers, fluoropolymers and can be applied to all vehicle surfaces! Paint, glass, plastic, wheels, calipers, and wheel wells are all easily within reach with HydroFoam. This truly unique foam wash and sealant (in one) lifts the dirt whilst in the Merino wiping stage and then, during the rinse phase, an ultra-water-repellent coating is immediately formed!