Renogy Boot Dryer Shoe Dryer, Glove Dryer & Boot Warmer with Heat Blower, Portable Adjustable Rack and Timer, Folding Design & Quick Drying for Shoes, Gloves, Hats, Socks, Ski Boots

Product Information

Rotate the dial to select the desired length of time for drying. The maximum time is 180 minutes or 3 hours. Time is displayed on the LED readout and will count down until time expires when the unit will automatically shut off. Assemble the Original PEET Dryer base by sliding together the base plates. (The Multi PEET Dryer base does not require assembly). There must be at least 6 inches of clearance between the top of the footwear and the base of the dryer. This will allow warm air to move freely for proper drying. Smart Temperature Control and Timer Functionality: Equipped with a PTC heat generator, the shoe dryer precisely controls the drying temperature, maintaining it at a safe 55°C to prevent overheating and damage to your beloved footwear. Customize drying times with 4, 8, and 12-hour timer options for safety and energy efficiency The Go! PEET Dryer uses Positive Temperature Coefficient (PTC) heating technology to assure safety. PCT heating elements are small ceramic stones with self-limiting temperature characteristics. PTC stones are energy efficient and have fast heating response times that plateau once the pre-defined reference temperature is reached. This technology has been installed and set to a predetermined temperature that maximizes the effectiveness of the dryer and will not allow it to overheat.

Dryer Comparison - Christmas 2022 Best Drysure Shoe Dryer Comparison - Christmas 2022

The PEET Dryer can dry footwear without damage to any type of material. Footwear and gear can be washed first, or simply dried on the PEET Dryer after wearing. Do not place the PEET Dryer close to a second heat source, such as a furnace register. Advantage PEET Dryer (M07F) The PEET® Dryer is designed for easy use and long service. When you follow these simple instructions and guidelines, the PEET Dryer will dry your footwear or gear safely and efficiently. Drying time depends on material and saturation. ​ Intelligent Timer】Set different working time for different kinds of shoes (up to 99 minutes). Easy to reduce power consumption. Function: drying, warm, eliminate bad odor and sanitize shoes! Protecting your shoes from humidity! Warm your boots in cold winter morning. To dry gym shoes or athlete’s foot shoes. Suitable all types of shoes and boots, cotton slippers, leather shoes, canvas shoes, work boots, snow boots, and sneakers.To turn on the Power Cell PEET Dryer, simply plug it in. The signal light indicates that the dryer is warming up. It will reach its maximum temperature in 10 minutes. There are no fans or moving parts, therefore, it will not blow air or make noise. Suitable for Various Footwear: The shoe dryer accommodates a wide range of shoe types, including cotton slippers, leather shoes, canvas shoes, work boots, snow boots, and sneakers. Regardless of your shoe style, it delivers outstanding drying results Place the dryer in the corner of the safe or cabinet with the AirChamber in the upright position. If desired, the dryer can be mounted to the floor or base of the safe or cabinet (never to the sides or ceiling). Fasten the dryer to the base surface by securing screws in the holes on the dryer’s base into the safe’s padding (not into the metal). Eliminates Damp & Odor】Optimum heat circulation effectively eliminates moisture, damp, sweat, and odor in shoes. Getting caught in a rain? Don’t be upset. Renogy boot dryer is ready to restore your soggy shoes to dryness and comfort. Included are 3 components: the electrical cord, the plastic plug housing and the prongs/holder. Make sure your hands are clean and dry before beginning installation.

Dryer Comparison - October 2023 Lnideas Electric Shoe Dryer Comparison - October 2023

The PEET Dryer will get warm, reaching its maximum temperature in 10 minutes, but it does not get hot. This product uses natural thermal convection technology; there are no fans or moving parts, therefore it will not blow hot air or make noise. Place your footwear upside down over the Footwear DryPorts. Make sure the toe is higher than the heel so that the footwear will dry thoroughly. Loosen tongue and laces for a loose fit between the footwear and the AirChambers. This will allow air to circulate properly.Invert the PDM and insert the top vent caps at a downward angle into the footwear. O3 is heavier than air and will fill and treat the footwear. The Go! PEET Dryers can safely be left plugged in and in your footwear overnight or until you are ready to wear them again, without any harm to the product.