Doc Johnson Optimale C-Ring 45mm Slate

Product Information

Outside diameter of the ring: The outside diameter of the ring is freely selectable from the mentioned minimum dimension ODR min. and is at the same time the corresponding dimension to the outside diameter of the groove.

Wills Rings® C | Static Seals | Trelleborg Wills Rings® C | Static Seals | Trelleborg

The inside diameter of the metal C-ring for external pressure is accepted as reference dimension. The groove inside diameter is somewhat smaller than the ring inside diameter. Therefore the ring inside diameter has to be somewhat bigger than the groove inside diameter.Pressing load: the mentioned guide values refer to 1mm seal length. To obtain the total load of the seal for the design of the construction, this value must be multiplied by the circumferential length of the seal. Available are the same materials and coatings as with O-rings. Inconel X-750 (= code no. 5) is the standard material of C-rings. Applications are possible in the range up to 980 degrees centigrade above zero. High-vacuum 10-10 mb l/s up to the ultrahigh pressure range of 6800 bar can be accomplished with metal C-rings. Punched “shovels” leave “windows” on the outside, facilitating vapor flow and increasing capacity compared with the R-Ring The outside diameter of the metal C-ring for axial thrust and radial sealing is accepted as reference dimension. The radial sealing is effected by the C-ring between the inside and the outside diameter.

C-Seals | Metal Sealing | Omniseal Solutions™ Metal C-Seals | Metal Sealing | Omniseal Solutions™

Seals for applications in buildings and construction, aerospace, automotive, agriculture, renewable energy and water infrastructure.Metal C-rings are static sealing elements for machines and installations with high requirements. Metal C-rings are considerably more elastic than metal O-rings and other metal seals. The correct dimension and quality of finish of the groove are as important as the metal C-ring itself for the use of the seal. The following listed recommend groove dimensions for internal and external pressure applications are to be understood as general recommendations for the preparation of sealing faces. Sarah Sloane, a sex educator who coaches sex-toy classes at Good Vibrations and Pleasure Chest, previously told SELF that the Lelo Tor 2 is a high-quality option for anyone looking for “less rumbly, less noticeable, and more buzzy vibrations.” Speaking of, there are six vibration modes to choose from, with increasing intensity. Should you require any further instructions or recommendations, please supply us the following information: The outside diameter of the metal C-ring for internal pressure is accepted as reference dimension. The groove outside diameter is somewhat bigger than the ring outside diameter. Therefore the ring has to be somewhat smaller than the groove outside diameter.