Philips Oneblade Blade

Product Information

If your mobile device’s operating system has been updated since you last paired your OneBlade, this may be the cause of the issue.

To resolve this, try resetting the connection between your OneBlade and the app by following these steps: Unpair your OneBlade: hold the power button on your OneBlade for 10 seconds to reset the connection. The light ring will start to flash blue. If you are using your OneBlade with a new or different mobile device than before, unpair and re-pair it using the instructions provided above. However, if the OneBlade's battery level is below 60%, the update will not take place, and this may not always be obvious to the user. If the battery level is below 60%, the consumer should close the app, charge their OneBlade to above 60%, and then repeat the process of opening the app and tapping the speed guidance widget.Note: Operating instructions may differ depending on which mobile device you use. Refer to the user manual for your mobile device for detailed instructions. If your OneBlade is not pairing with your mobile device, the troubleshooting tips below may help you find a solution. The Daily Care app includes a feature called "speed guidance", which can be used with the Bluetooth-connected Philips OneBlade. Unpair your mobile device: open the Bluetooth settings on your mobile device, and select your OneBlade from the list of paired devices. Tap “Unpair” or “Forget” to remove your OneBlade from the list of paired devices.