About this deal
Long-Lasting: Each filter lasts up to 3 months*. Your Perfect Prep machine will notify you when the filter is due to be replaced Press the filter volume reset button for 2 seconds to clear the memory. Discard dispensed water. Your machine is now ready to use. With the water hopper in place (but not the filter) fill the hopper with 1 litre of freshly boiled hot water.
Replace the water tank and turn on the machine. Run two cycles of hot water through the machine to flush out any remaining descaling solution.The perfect Prep™ can detect limescale build up, notifying you when it needs descaling. The descaling process will remove deposits of calcium and other minerals in the system that may affect its performance. A red descale warning light will illuminate when the unit requires descaling soon. If the red light flashes, you should descale immediately. Clean the external machine surface with a clean cloth (it is advisable to use an antibacterial solution), taking care to clean in all grooves and under the dispenser spout. Listen out for the beep and the empty warning light should come on. level low warning light will illuminate once the water has flushed through the system. When it comes to preparing milk for your baby, safety and hygiene should be your top priority. The Tommee Tippee Perfect Prep Machine is a convenient and efficient way to prepare your baby’s milk, but it is important to take steps to ensure that the machine is clean and safe to use.
At this time the lid, hopper and bottle stand should also be cleaned using hot soapy water, rinsed thoroughly, and allowed to dry naturally (do not use cloths or tea towels to dry).Replace the filter in your Perfect Prep Machine every 3 months to ensure that it continues to provide safe and hygienic water for your baby’s formula. Make sure to use only Tommee Tippee filters that are designed for use with the Perfect Prep Machine. Bottle Feeding