WD_BLACK SN770 2TB M.2 2280 Game Drive PCIe Gen4 NVMe up to 5150 MB/s

Product Information

The SN770 can fit in a Sony PlayStation 5, but WD does not claim compatibility with that gaming console. Its sequential read speed is below Sony's recommended 5,500MBps, and the PS5 does not support HMB architecture. The XPG Atom 50 suffers the same limitations, but ADATA still touts it as PS5-compatible. (Any M.2 SSD used in a PS5 will be a secondary drive primarily used for game storage, so peak speed is not the primary consideration. But we still recommend looking for a drive that meets Sony's spec and asserts compatibility.) The "terabytes written" spec is a manufacturer's estimate of how much data can be written to a drive before some cells begin to fail and get taken out of service. (TBW tends to scale 1:1 with capacity, as with the drives cited here.) WD's warranty covers the SN770 for five years or until you hit the rated TBW figure in data writes, whichever comes first. Flipping the SSD shows that aside from more branding and all of the WEE, ROHS and QC type certifications, there is no further components of note. A 1TB SSD arriving single-sided is not unusual, but that single NAND design does set it apart from other 1TBs on the market notably.

The first range of tests were using ATTO Disk benchmark and three separate file sizes were used, 256MB, 1GB and 4GB. Each test was conducted upto 64MB I/O and we recorded the sequential performance and the IO/s: if you are still going around in circles and need direct consultation, we have just started providing one-hour consultations via zoom. You can find out more about them via the link below: i was really afraid that my system wont be able to cope with the SSD because my system doesnt support HMB. But at the same time, it also only supports PCI Gen 3. I am certainly not getting the absolute most out of the SSD but for my basic workloads (mostly involving browsing the internet and playing a game or two) this SSD is perfect. Now it dropped in price to about 40€ for a Terrabyte here in germany and it was a no brainer. I always had inconsistancy inssues with cheap small SSD’s in the past because i always cheaped out to some absolutely unknown brand. For me, now i finally know what an SSD is suppose to feel like, and that for 40€ so i aint complainingThanks for your great videos! What strikes me is when you touched on the apparent greater efficiency and cooler operation. My usage scenario is as a light-moderate computing/OS drive in what is basically a thin Ultrabook (Samsung Book Pro 360). No gaming. So I’m considering battery draw and cooler running in addition to performance. This is one concern I have regarding the SN850 or Samsung 980Pro. Do you think I need to worry about this? Otherwise the difference in price is such that I’d just grab the SN850. to 4.5ghz with 32gb DDR 4 memory. I do play WOW not daily. Can i allocate an amount of my DDR4 to it? any comments on this would help. NASCompares So you say the SN770 suffers a drop in sustained writes after a while. Are you saying the SN850 does not (as with all DRAM SSDs)? I put it to you that the Host Memory Buffer has nothing/little to do with the large drop in sequential write speed. It’s when the cache is used up. Since 1982, PCMag has tested and rated thousands of products to help you make better buying decisions. See how we test. The controller eschews the DRAM cache used by some pricier drives, instead enlisting your PC's main memory as a host memory buffer (HMB). This makes the SN770 the latest of several recent M.2 drives to employ DRAM-less architecture; others include the XPG Atom 50 and the WD Blue SN570. Although dropping DRAM helps reduce a drive's cost, it can potentially hurt performance, but there was scant evidence of that when we benchmarked the SN770 using our testbed system.

Since 2004, I have worked on PCMag’s hardware team, covering at various times printers, scanners, projectors, storage, and monitors. I currently focus my testing efforts on 3D printers, pro and productivity displays, and drives and SSDs of all sorts. Using CrystalDisk, we got a good measure of the drive and verified that this PCIe Gen 3 x4 SSD was indeed using the 4×4 lane. Additionally, the temp averaged out around 45 degrees between each test being conducted. I just wish you would have used HWInfo for monitoring the Temperature. There is a Sensor called “Temperature 2” for the SSD which is much higher compared to the Temperature you considered in the Test. Join the Inner Circle? The Inner Circle is a community of like-minded individuals who are passionate about the same things you are. You’ll have the opportunity to ask questions and get replies from me and other Inner Circle members who are dedicated to helping each other out.Lower down the range, I recently bought a DRAM-LESS WD Blue SN570 2TB. What a disappointment! Using my Beelink Mini S Windows 11 PC, with the drive in two different USB enclosures, it will NOT work! The drives appears and disappears. However, it seems to work on Windows 10. Is this some weird compatibility issue? Is the SSD faulty? Is it HMB? Although new to SSDs, I’ve built PCs for decades, but it’s got me beat? All my other SATA SSDs work fine!

Next, I switched to AS SSD benchmark. A much more thorough test through, I used 1GB, 3GB and 5GB test files. Each test includes throughput benchmarks and IOPS that are respective to the larger file sizes (important, if you are reading this and trying to compare against the reported 4K IOPS from the manufacturer).Over the years, I have reviewed iPad and iPhone science apps, plus the occasional camera, laptop, keyboard, and mouse. I've also written a host of articles about astronomy, space science, travel photography, and astrophotography for PCMag and its past and present sibling publications (among them, Mashable and ExtremeTech), as well as for the PCMag Digital Edition.