Interior Brick Sealer & Dustproofer - Seal, Dustproof & Protect Interior Brick & Masonry (1 Litre)

Product Information

One specification to look out for is the VOC level. VOC stands for volatile organic compounds, and they are incredibly bad for your health and are regulated by law. Look for lower VOC levels because they will be less toxic and have lower fumes.

There is another option which is cheating basically, but would cost less and if done correctly, no one would know the difference unless they went up and touched the wall. Once the above is done, lightly brush the wall with a soft broom head or old emulsion brush to get rid of dust. I will post this on our blog, with my reply, and your details removed, to see if anyone else has any suggestions.

Brick Sealer Is Simple To Apply

However, I can’t find any good advice (for the UK) of what to use to do about this. I don’t want the walls to be particularly glossy and shiny either.

Our clear stone wall sealer, by contrast, is an advanced water-based fluoro-carbon which leaves no visible trace. It effectively repels liquids to protect the appearance of your stone surfaces without darkening. Liquids "bead up" on the surface and are not absorbed into the substrate, thus protecting your stone against staining. Suitable for interior sealing of: This may sound like a no-brainer, but you must factor in how much sealer you need. Some jobs will require multiple containers of sealer, while others will only need half a gallon.If you’re itching to see the walls and all that trim painted now, we feel you! We’re collecting paint quotes, and we’re in the final stages of choosing color. She’s looking like a real home, and it’s only looking up from here! After waiting about a day for the surface to dry, fill up the pump sprayer with your sealer of choice and spray it onto the material. Be sure to spread any runs or drips while they are wet with a paint roller. Allow the sealer to dry however long the instructions say before adding a second coat. If you have beautiful masonry and stonework on your property, you know the struggle to keep it looking good. Besides throwing up tarps every time it rains, the best option is to protect the surface with a sealer. Many homeowners do not realize how much a sealer can help, so they forgo the option. Disclaimer: “Unibond” is a registered trade mark, owned by Henkel, and is only used here as a product review. Thank you The surface becomes darker and unattractive. Over time excess trapped moisture darkens the surface.

However, it’s not the best idea to get too big of a container as it can get wasted if you don’t need it in the first place. That’s why you need to identify the length of the surface that you are going to be working with and choose the quantity of the sealer according to that. Dependent on the porosity of the surface 1 litre of product should cover approximately 4 to 6 m2 . STORAGE / SHELF LIFE Lightly brush the solution onto the wall, starting at the top and working down and remember to wear washing up rubber gloves whilst doing it.Promain offer a range of clear sealants, suitable for waterproofing a range of indoor and outdoor surfaces, including both horizontal and vertical surfaces. Whether you have an outdoor wall you want to protect from wind and rain or a patio that you want to waterproof, you'll find the clear sealant you need right here. Freezing and Thawing: Freezing and thawing can cause property damage to floors and walls, especially in locations prone to heavy winters. A sealer will prevent water from getting into your surfaces. Tools and equipment should be cleaned with warm soap and water immediately after use. DO NOT allow to dry before cleaning. HEALTH & SAFETY PRECAUTIONS Another great thing about this seal is that you won’t have to clean your walls constantly once you apply the seal. It’s going to prevent the moss buildup and also help to fight dirt, which is a great thing.