HG Cement Grout Film Remover 11, Removes Grouting Residue from Non-Porous Ceramic Tiles & Flagstones – 1L (101100106)

Product Information

This is how you use HG tile cement grout and mortar remover to remove cement stains and mortar residues: Leave to work for a couple of minutes. Scrub thoroughly till clean then rinse off with plenty of water. Repeat treatment with HG Tile Cement Grout and Mortar Remover if necessary. Do not use on calciferous natural stone such as marble, travertine, bluestone and various types of slate and concrete tiles/floors. Which HG products do I need for my tile floor? Do not use too much water when rinsing. It is highly recommended to use a wet vacuum cleaner after rinsing with water. If residues prove difficult to remove use a suitable synthetic scubbing pad. It is recommended to use HG Hagesan Tile Cleaner on floors when cleaning for the first time to remove the very last remains of cement after using HG Tile Cement Grout and Mortar Remover.

Dilution: Depending on the degree of residues dilute HG Tile Cement Grout and Mortar Remover from 1:4 to 1:10 with water. HG tile cement grout and mortar remover cannot be used for calciferous natural stone, such as marble, travertine, bluestone, various types of slate and concrete tiles or concrete floors. For those you need HG natural stone cement grout film remover. Dilute HG Natural Stone Cement Grout Film Remover 1:10 with warm water (approx. 120 degrees F). Apply with a scrubbing brush and brush softly on the wet floor. Leave to penetrate for approx. 5 minutes, keeping the surface damp, then scrub thoroughly and rinse with clean water afterwards.

Remove cement grout? The unique aspect of our cement residue remover is that it dissolves cement from the tile surface, but not the cement from the grouting. The grout is even strengthened. Also suitable for removing rust. When it concerns really stubborn cement and mortar residues, we recommend HG tile cement grout and mortar remover (product 12). How do you use HG tile cement grout film remover? Cement on a floor dissolves in acid, so that's why you can use vinegar. Be very careful with calciferous stone types, such as marble. Marble can be affected by acid. Silicone edges, in the bathroom for example, can also be damaged by vinegar. When using this product we recommend using Eye Protection and an Odour Respirator (for poorly vented areas) as well as protective gloves.

For cleaning of walls: see above directions for use. Ensure that the wall is wet. Work from below upwards to prevent dripping. Scrub thoroughly with a scouring pad or a stiff scrubbing brush and mop up. Rinse well (2-3 times) with water. Repeat this treatment with HG Tile Cement Grout Film Remover on affected areas if any white stains remain. Remove splashes of HG Tile Cement Grout Film Remover on paintwork immediately.Scrub the surface well with a stiff broom or scrubbing brush. Leave it to work for a few minutes and scrub well once more. Attention: To remove cement surplus from calciferous natural stone such as marble, travertine, Blue (hard)stone, several types of slate, terrazzo, granito, basalt and cement tiles. For these surfaces see HG Natural Stone Cement Grout Film Remover First wet the surface with clean water and then apply the solution using a floor cloth or mop. Do not treat more than 10 to 15 m² at a time. The product removes efflorescence and mortar stains from porous and non-porous ceramic tiles and flagstone and is also suitable for non-calciferous natural stone. Including Norwegian slate, granite and quartzite.

Attention: To aviod etching calcareous natural stones, do not use acids, but only HG Natural Stone Cement Grout Film Remover. Use: Approx. 20-50 m2, depending on the dilution and intensity of the cement grout film. Which HG products do I need for my tile floor? Various tips are shared on the internet on how to remove cement residue from tiles. HG has a selected a number on your behalf. You can try to use these to remove cement or mortar residues.Besides this product for removing cement residues, there is also an HG product for removing stubborn cement and mortar residues. The HG range for tile floors also consists of many different products for the optimum care of your precious floor. For example, you can choose from different protectors against wear or against penetrating grease and dirt. This range also comprises a number of different cleaners for regular mopping, and an intensive cleaner for removing grease and caked-on dirt for example. IMPORTANT: DO NOT apply HG Tile Cement Grout and Mortar Remover to calciferous natural stone such as marble, travertine, blue (hard)stone, several types of slate, terrazzo, granito, basaslt and cement tiles. Use HG Natural Stone Cement and Lime Film Remover. If in doubt test on an inconspicuous area first or use HG Hagesan Natural Stone Cement Grout Film Remover. Try to remove the cement stains or mortar residue with one part vinegar and one part warm water. Then you brush this solution onto the surface. Leave to absorb and then rinse with clean water. Read all precautions before using HG Natural Stone Cement Grout Film Remover. Wear Eye Protection (saftey glasses) and rubber gloves. Remove any loose cement, grout and lime scale as much as possible by sweeping. Wet the surface to be cleaned. Directions for use: First try HG Tile Cement Grout Film Remover on a small, preferably inconspicuous place. Apply HG Tile Cement Grout Film Remover liberally and spread over the floor covering no more than 10-15 m² at a time. Leave HG Tile Cement Grout Film Remover to work for 15-20 minutes, keeping the floor wet with solution during this time.

Remember, these are DIY tips. Use these products with caution and test them in advance. If you want to remove cement stains safely and effectively and strengthen your grout at the same time, use HG tile cement grout and mortar remover. Follow the steps below to safely and effectively remove cement film and lime film with HG natural stone cement grout film remover (HG product 31): Directions for use: Try HG Tile Cement Grout and Mortar Remover on a small inconspicuous area first. Wet the surface down with clean water before using. Then apply and spread the diluted HG Tile Cement Grout and Mortar Remover with a scrubbing brush or pad. Scrub the surface well with a stiff broom or scrubbing brush. Leave to work for 15 - 20 minutes, keeping the floor wet with the solution of this cement residue remover in the meantime. Attention: DO NOT apply HG Tile Cement Grout and Mortar Remover to calciferous natural stone such as marble, travertine, blue (hard)stone, slate, terazzo, granito, basaslt and cement tiles. Use HG Natural Stone Cement Grout Film Remover.

Big brands, big savings

Besides this product for removing cement and scale residue safely, the HG range for natural-stone floors also contains many different products for the optimum care of your precious floor. For example, you can choose from different protectors against wear of the top coat or against penetrating grease and dirt. There are also special cleaners for regular mopping and for intensive cleaning to remove grease and caked-on dirt for example. Then apply the solution liberally with a floor cloth or mop. Do not treat more than 10 to 15m² at a time. This cement cleaner removes cement film and mortar residue from non-calciferous natural-stone types, such as Norwegian slate, granite and quartzite. What is so unique about this cement floor cleaner is that it dissolves the cement on the tile surface but not the cement in the grout. The grout is even strengthened. How do you use HG tile cement grout and mortar remover?