About this deal
Application: Stir thoroughly before use. The product may be appliedby brush or roller. If applying by brush, apply evenly, following the grain Drying Time: Touch dry in 1 hour. Handle after 4 hours. Apply a second coat after 4 hours, if necessary. Full hardness after 4 hours. Surface Preparation - For best results, ensure the surface is clean, dry and free from loose paint, mould and mildew, wax or oil. If wax has been used clean the surface thoroughly with a suitable wax remover. We recommend that bare wood should be sanded before painting. Hard glossy surfaces should be abraded before painting. Cover surrounding areas to protect from spray mist. surface afterwards with water. If wax or oil has previously been usedon the item, clean the surface thoroughly with white spirit. If paintingover a hard or glossy or previously painted surface abrade the surfacebefore application. Limitations: For interior use only. Temperature at time of theapplication and during drying should be greater than 5°C. To ensurepaint suitability for your particular project test on a small inconspicuousarea first.
Application: Stir thoroughly prior to use. The product may be appliedby brush or medium pile roller.
Specialty Products
Clean Up: Remove as much product as possible from applicationequipment before washing with water. Do not empty into drains orwater courses. Some local authorities have special facilities for thedisposal of waste coatings.
Available in an extensive range of 100+ colours, brighten your interior walls with vibrant brights, playful pastels or soothing neutrals A luxurious durable matt finish for interior walls and ceilings.Class 1 scrub rated for easy cleaning. Scuff and stain resistant. Clean Up: Remove as much product as possible from application equipment before washing with water. Do not empty into drains orwater courses. Some local authorities have special facilities for the disposal of waste coatings. Coverage: Up to 12m²/l per coat. Coverage may vary depending uponmethod and rate of application and porosity of surface. Stain Removal: Remove any stains promptly, most common stainse.g. dirt, ketchup, mustard, tea, coffee can be removed using a softcloth and warm soapy water. Do not use scourers or abrasive cleanersas these may mark the paint finish.
Similar products
For reasons of hygiene and safety, personal grooming products, cosmetics or items of intimate clothing cannot be returned. Application: Stir thoroughly prior to use. The product may be applied by brush or roller. If applying by bush, apply evenly following the grain of the wood. If rollering, use a nap mohair roller. To create a distressed look apply two coats in contrasting colours. Allow to dry then lightly abrade with moistened sand paper or a stainless steel scouring pad - abrade with the grain of the wood. Protect the effect with Rust-Oleum Furniture Finishing Wax.