GODOX SK300II 300Ws GN58 5600K Studio Strobe Light Bowens Mount Monolight Flash with BD-04 Barn Door Color Filters Reflector Set

Product Information

The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: X1, XT16 or FT-16 remote control, Power Inverter, Softbox, Photographic Umbrella, Light Stand, Barndoor, Snoot, etc.

Godox SK300II Studio Strobe, 300W GN58 5600K Studio Flash

Se utiliza para almacenar y combinar páginas vistas por un usuario en una sola grabación de sesión.

Here is list of combination that I was thinking about (sorted from lowest to highest price, bold are favourites): Establecido con fines de prevención del fraude y nos ayuda a evaluar el riesgo asociado con un intento de transacción. To fire the flash without taking a picture, press the test button (4). It can also help adjust the flash brightness when combined with the select dial (14). Press the SET button and turn on the flash to view its version. Sync Triggering The strobe also only has a 4-stop range (1/1 - 1/16) strobe so the range is a bit limited. You are better off spending more for 5-stop or higher range strobe.

GODOX SK-300II Studio Flash Head | Godox Official UK Distributor

Modeling lamp will be off automatically after lighting for 4 hours, avoiding overheat due to long-time lighting when the user is not nearby. To prevent damage to the product or injury to you or to others, read the following warnings in their entirety before using this product. Keep these safety instructions where users can read them for ready reference. Short press the GR/CH button can adjust the built-in wireless group. When the group indicator on the LCD panel is blinking, turn the select dial to change. And long press the GR/CH button can adjust the built-in wireless channel. When the channel indicator on the LCD panel is blinking, turn the select dial to change. Slave Trigger Model Utilizado por Google Analytics para recopilar datos sobre cuántas veces el usuario ha visitado el sitio y las fechas de la primera y última visita.You buy a TT600 and a trigger (I'd recommend an XPro rather than an X1T). You can then experiment with the TT600 as the main light using a reflector as fill and see if it's powerful enough. If it is powerful enough you can get another TT600 and you have spent the minimum amount of money to solve your problem. If it isn't powerful enough you can get an SK300II or AD200 and use the TT600 as fill and you haven't wasted any money. on your advice, did just that after one session, can't/refused to put up with it now my sk400ii is effectively mothballed This product, except consumables e.g. flash tube and modeling lamp, is supported with a one-year warranty. Use the power cord to connect the flash to an AC power source and turn on the power switch (3). Modeling Lamp When OFF is displayed, short press the Button to enter PROP mode. Now the LCD panel shows PROP.

GODOX Photo Equipment Co.,Ltd. SK Series Kit-Product-GODOX Photo Equipment Co.,Ltd.

If you are considering changing camera brand then it's not a good idea to buy a Nikon compatible TTL strobe if you intend to use it on camera. Shut down the power and remove the power cord before replacing the flash tube. Wear insulated gloves to loosen the iron wire on the tube, keep a balanced hold on the two feet of the flash tube and pull out the old tube gently. Take down the feet casing from the old tube and put it on the new one. Hold two feet of the new tube, and target directly towards the two copper outlets, then push them slightly in. Twine the iron wire on the stainless steel sheet to fix the flash tube.Synchronously press the GR/CH button and the S1/S2 button can turn on/off the built-in wireless transmission. If there are no wireless and channel indicators displayed on the LCD panel, the built-in wireless transmission is off. On the contrary, the built-in wireless transmission is on. Synchronously press the S1/S2 button and BUZZ button to recover factory settings. Alarm Display Optic S1 Secondary Unit Setting: In M manual flash mode, press button so that this flash can function as an optic S1 secondary flash with optic sensor. With this function, the flash will fire synchronously when the main flash fires, the same effect as that by the use of radio triggers. This helps create multiple lighting effects. The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Godox SK300II-V 300Ws Studio Flash Strobe Light in

Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories. The flash-tube and the modeling lamp are user-replaceable. Replacement tubes and lamps can be obtained from the manufacturer. Short press the Modeling Lamp Button (5) to choose the modeling lamp's mode (OFF, PROP and percentage); and long press the Modeling Lamp Button (5) to switch on or off the function that the modeling is off when triggering the flash. Once the flashes or strobes move off camera and the subject to flash/strobe distance is fixed the exposure never changes. You should immediately go to Manual Exposure on the camera and Manual Power control on the flash or strobe As you think (and I agree with you) that a TT600 will be fine for a fill light, may I make a suggestion? if your equipment is list correct, you're shooting with a d600 and 50 1.8g. Your lens at above f11 has diffraction limits, resulting in less sharp pictures. https://www.dxomark.com/Lenses/Nikon/Nikon-AF-S-Nikkor-50mm-F18G-mounted-on-Nikon-D600---Measurements__834 If you can, keep it between f2 and f11 for the best picture;When using a snoot, do not keep the modeling lamp on for a long time or fire too frequently (not over six times for one minute). Overheating will result in damages for strobe housing and/or studio light.