276°
Posted 20 hours ago

Mapei 113 UltraColor Plus Cement Grey Grout 2kg

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

If the cleaning operation is carried out too soon (the mix is still too wet), some of the mix may be removed from the joints. If grouting is carried out in extremely hot, dry or windy weather, we

The liquid residual may be removed with the same sponge, which must be replaced when it becomes too impregnated Kerapoxy Easy Design is a two-component, epoxy resin-based decorative grout, with glass micro-spheres and other Kerapoxy Easy Design does not guarantee a perfect bond when used as a grout if the edges of tiles are wet or contaminated with cement, dust, oil, grease, etc.colours and quantities used, however within the maximum dosage of 3% by weight so that the workability of the Mixing Mapecolor Metallic with Kerapoxy Easy Design of other colours may result in numerous metallic effects with After the final cleaning operation, if the surface still has traces of Mapei Ultracolor Plus due to incorrect application, it may be cleaned down with an acidic cleaner (e.g. Keranet), by following the relevant instructions, at least 24 hours after grouting the joints. Only use Keranet on surfaces which are resistant to acid, and never use it on marble or limestone material. Applications for this product include: Grouting floors and walls in areas subject to intense traffic (airports, shopping centres, restaurants, bars, etc.) / Grouting floors and walls in residential areas (hotels, private houses, etc.) / Grouting floors and walls on façades, balconies, terraces and in swimming pools. Finishing: When the mix loses its plasticity and becomes opaque, which usually takes place after 15-30 minutes, clean off the excess Ultracolor Plus with a hard, damp sponge (e.g. a MAPEI sponge), working in a diagonal direction to the joints. Rinse the sponge frequently, using two different containers of water: one to remove the excess mix from the sponge, and the other, containing clean water, to rinse the sponge. This operation may also be carried out with a machine with a sponge belt or rotating disc. When the mix is partially set, after 50-60 minutes, a damp Scotch-Brite® sponge or an abrasive felt disc may be passed over the joints to even out the surface.

Mapei Ultracolor Plus Tile Grout is made up of a blend of special hydraulic binders, graded aggregates, special polymers, water repellent admixtures, organic molecules and pigments.The use of a Scotch-Brite abrasive pad instead of the traditional cellulose sponge for cleaning joints is recommended in faster application times and makes it easier to clean from surfaces, with less waste and easier to obtain a good finish; After the finishing operation, it is very important that no traces of Kerapoxy Easy Design remain on the tile surface. Once In the case of very large floor surfaces, finishing may be carried out by wetting the surface and using a single-head rotary

Kerapoxy Easy Design allows to create floors, walls, worktops etc. in compliance with the HACCP system and the used for grouting. Kerapoxy Easy Design may be mixed with up to 6 % by weight of MapeGlitter, metallised coloured glitter, to create aesthetic effects. Percentage depends on the aesthetic effect and workability desired. MapeGlitter is available in silver and gold.case of tiles with a particularly rough, structured and/or irregular surface. The liquid residual may in any case be removed

Applying the grout: Fill the joints with the Mapei Ultracolor Plus mix using a special MAPEI grout float or rubber squeegee, without leaving any gaps or steps. Remove any excess of Mapei Ultracolor Plus from the surface, by moving the float diagonally to the joints while the mix is still fresh. Repairing existing degraded grouts by removing all loose areas and to a minimum uniform depth of 3 mm. Installing and grouting decorative coverings in environments with an high aesthetic value (e.g. showrooms, commercial environments, etc.). Spread Kerapoxy Easy Design over the tiled surface with a special rubber grout float (such as MAPEI float), making sure Mapei Ultracolor Plus forms a smooth, compact finished surface with optimum resistance to abrasion, compression and flexural strength, and good resistance to acids with a pH > 3. Floors are ready for light foot traffic after approx. 3 hours. Surfaces grouted with Mapei Ultracolor Plus may be put into service after 24 hours. Basins and swimming pools may be filled up 48 hours after grouting.Please refer to the Technical Data Sheet for further instructions on how to correctly prepare, apply and finish Ultracolor Grout grout. The efficiency of UltraCare Kerapoxy Cleaner depends on the amount of residual resin and how much time has passed where a high protection from the formation and proliferation of micro-organisms (such as fungus and mould) is required; Expansion and movement joints on walls and floors must never be filled with Mapei Ultracolor Plus. Use a suitable flexible sealant from the MAPEI range.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment