Joined in 2023 
82 
63 About this deal
INCRA's Miter Express offers any miter gauge owner the safest and most accurate cross-cutting platform available. Miter gauge & fence sold separately; use the Miter Express with ANY standard miter gauge! Available for traditional 3/4” x 3/8” miter slots and Shopsmith machines. Shown above with an optional INCRA Miter 1000SE mounted and ready, the Express features 2 embedded T-Slot channels to secure the included Hold Down Clamp and Outboard Fence Support. These slots are also invaluable for mounting your own custom Jigs and Fixtures. This Special Edition Miter Fence telescopes from 36" to a full 64" length. Includes the Dual Flip Shop Stop and INCRA's patented Automatic Positioning Control. INCRA Miter Gauge 5000 blends the incremental angle control features of the Miter 3000SE with a very special 3-Panel Sled for the ultimate miter cutting workstation for the table saw. Shown here with optional INCRA Miter Gauge. Miter Gauge not included! Blade cover removed for demonstration purposes. Do not work without blade cover! The advantages are simple: The Miter Express doubles your miter gauge's capacity for cutting large panels, it offers more hold down options for greater safety when cutting small parts, and it provides better control overall because the lumber is carried through the blade instead of pushed across the saw.
As shown, the same INCRA HoldDown Clamp also keeps your fingers comfortably away from the blade when cutting workpieces that are too small to safely hold by hand. The Special Edition Miter1000 comes standard with Incra’s finest cross cut fence, the FlipFENCE and FlipSTOP. The unique design of this fence guarantees a perfect stop point for mitered board ends. When in the stop position, both flip arms fully engage the front surface of the fence, thus preventing the board tip from slipping behind the stop. Six expansion disks adjust both sides of the bar for ZERO side play, low-friction travel on all table saws with standard miter gauge channels, including Delta, INCRA Miter Gauge V27 is engineered to provide a high performance, yet low cost upgrade for any tool in need of a better miter gauge such as a Table Saw, Band Saw, Router Table, Disk Sander or Belt Sander.The Incra MITER1000 SE features a 3/4" x 3/8” steel miter bar with up to six expandable nylon rings to achieve an absolutely perfect fit in any standard miter gauge slot.
The Miter V27's compact protractor design works on applications typically not candidates for aftermarket gauges because of the narrow distance between the cutter and miter slot. The V120's adjustable miter bar will fit square-sided miter slots 3/4" wide, 3/8" deep, and either with or without a 15/16" wide T-slot at the bottom. The miter bar's adjustment range accommodates slot widths between 0.740" to 0.760". The sled can be set up on either the left side or right side of the blade, and a renewable Drop Panel provides zero clearance tearout control on both sides of the blade.The INCRA Flip Fence and Flip Shop Stop are popular upgrades for all INCRA Miter Gauges, and the Flip Fence's mounting T-slot also allows integrating this stop and fence system into sleds and miter saws. Whether it's your basic 90° cut-off, simple picture frames, or a 20-sided object, the Miter1000SE byINCRA delivers perfect, repeatable accuracy.First time, Every time, Any angle.
Don't let the small size fool you! The NEW Miter V120 puts high-resolution, repeatable accuracy within the budget of every woodworkers. INCRA Miter Gauge V120 features an incredible 120 angle stops which are laser cut into the steel protractor, with a stop available for every whole degree and two special stops at 22.5 degrees for cutting eight-sided frames and mouldings.Craftsman, imports, etc. An excellent fit in the channel directly transfers the Miter 1000HD's incredible accuracy directly to your project. While the V27 delivers ALL the accuracy of its bigger INCRA Miter Gauge brothers, its no-nonsense design and compact size make it the most affordable INCRA Miter Gauge EVER! Now, the INCRA Miter V27 makes it possible to put an INCRA Miter Gauge in EVERY standard miter channel in your shop. Perfect for the INCRA V27 and V120 miter gauges and upgrades the Miter 1000 to Miter the 1000SE.The Flip Fence is designed to give you outstanding fence performance and rigidity. Manufactured by INCRA from aircraft-grade aluminium extrusions, this fence profile is designed to coordinate perfectly with the INCRA Flip Shop Stop. Six expansion disks adjust both sides of the bar for ZERO side play, low-friction travel on all table saws with standard miter gauge channels, including Delta, Craftsman, imports, etc. An excellent fit in the channel directly transfers the Miter 1000HD's incredible accuracy to your project. The Miter 1000's adjustable miter bar will fit square-sided miter slots measuring 3/4" wide, 3/8" deep, and with or without a 15/16" T-slot at the bottom. The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.765". The expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard 3/4" x 3/8" or near-standard miter gauge channels, including Delta, Craftsman, imports, etc. This means that all of INCRA's incredible precision will actually show up in your work because the bar CAN'T wiggle around in the miter slot. The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.765".
Great Deal 
New Comment