Joined in 2023 
82 
63 About this deal
At the six-month mark, all features continue to work well with no leakage or changes in overall performance. The showerhead was still fairly clean at this point, but it had some mineral deposit residue that cleaned off easily after soaking the showerhead in vinegar.
Extractor fans installed within zone 1 must be fitted with 12v SELV motors with the SELV transformers and isolators fitted outside of zone 0, 1 & 2.BS7671:2008 requires all electrical items in the bathroom to be RCD protected. A lot of the 230V fans are suitable for use in Zone 1 if they are RCD protected. Its unclear if your saying that the casing has been cut in some way at the top to allow the cable to enter the fan? if so then this will need to be sealed with silicone or similar if there is a gap of 1mm or bigger. IP45 is not a splashproof rating so the casing only needs to prevent access to live parts from human fingers and small diameter objects being pushed through small gaps. In addition to the basics, modern shower heads may offer extra features such as a built-in Bluetooth speaker or LED lighting. These aren’t always practical for a handheld shower, though, and they’re no substitute for an effective spray pattern. On that note, if a shower offers you ten different patterns, ask yourself how many you’re actually likely to use: most of us rarely need more than one or two patterns. Zone 2 for a shower room is the same height as zone 1 extended to 0.6m around the shower basin. If there is no shower basin zone 2 is replaced by zone 1 extended to 1.2m around the fixed shower head. Chris Fallon, general contractor and owner of Fallon Contracting, says that “installing a new showerhead after having an old one can actually make you feel like you have better water pressure.” Whether your old fixture is clogged with build-up or has faulty parts, upgrading your showerhead can result in a more enjoyable experience. And if you're looking to save money in the long run, a high-efficiency showerhead is a great way to reduce your water usage (and your water bill) each month. And while the speaker may be the product’s main selling point, the showerhead did not underdeliver on performance. We were impressed with the strong water pressure and wide-range spray. So although there’s only one shower setting, we think it should work for most people. We did notice that the product developed a few water spots, but it was overall easy to clean with some wet wipes or just a dry towel. Additionally, the product boasts a solid and durable construction, so if you’re looking for a long-lasting showerhead that can also blast your favorite tunes, the KOHLER Moxie Bluetooth Showerhead is a solid bet.
Shelling out extra cash for a quality, sleek showerhead can be a great way to upgrade your daily routine. While the Delta HydroRain Two-in-One Shower Head doesn’t come cheap, after putting this showerhead to the test, we think its dual design, variety of settings, and high-quality construction justify its price tag. The space under the bath tub or shower basin is considered to be zone 1. However, if the space under the bath or shower basin is only accessible with a tool, it is considered to be outside the zones. If you love an intense shower, nothing beats a high-pressure showerhead—and thanks to the AquaCare High Pressure 8-mode Handheld Shower Head, you don’t have to break the bank to get one. Through testing, we’ve confirmed that this showerhead offers high-end performance, with a 2.5 GPM flow rate and a wide variety of settings at a relatively low price point.When setting up the showerhead, we found that the installation instructions were clear. We also appreciated that the handheld wand was easy to detach and even came with an additional mount so you can place the showerhead at a different height if needed. This thoughtful feature is especially helpful for those living with kids or a roommate/partner with a height difference. The hose length was plenty long, too. Plus, the product features antimicrobial anti-clog nozzles to help keep the showerhead clean. In testing, we did notice slight leaks around the showerhead due to the plastic construction, but it was not majorly concerning to us. This really is an excellent extractor that uses just 2W of electricity when running continuously and no more than 5W at full pelt. It’s also one of the most attractive models around – the fascia can be used bare or with the included white magnetic cover – and one of the very quietest.
We evaluated the ease of setup by noting how complicated the directions were, how long the process took, and whether or not any special tools were needed. Next, we assessed the features (including Bluetooth, filters, and dual settings, if applicable), considering how useful and simple they were to navigate. To evaluate performance, we observed the water pressure and flow, taking into account the area and power of the stream. To evaluate the showerhead settings, we took note of how easy it was to adjust the position of each showerhead and whether or not the settings allowed us to customize the shower to different preferences. Vent-Axia has really pushed the boat out with this brand-new model. Aside from shifting up to 39l of damp air per second, this bathroom extractor comes crammed with more sensor tech than any other model on the market. In fact, it has a sensor for everything, even odour. Yes, that’s right, when this clever little air mover detects a nasty smell, it either switches itself on or, if already running, speeds up the fan, returning the bathroom to its original sweet-smelling scent in a thrice. RCDs are required for all circuits in locations that contain a bath or shower. The requirements for local supplementary bonding have been relaxed if certain conditions are met. 2014-05-04T11:20:01+01:00 In general, we’ve been pleased with the overall performance of this showerhead. But because the filters are pricey and have to be replaced so frequently, we’d really only recommend this product to those who are very conscious of water quality and willing to pay for the upkeep.Most showers and shower heads use a standard half-inch pipe and fittings, so you can mix and match hoses and heads from different manufacturers. If you’re upgrading your head, however, think about whether you need to upgrade the hose at the same time: if it’s worn or leaking, it could be part of the problem. Can a new shower head help with low water pressure? After testing this showerhead in our homes for three weeks, we found that the flow is still strong, and the nozzles don’t seem to get clogged easily with hard water or gunk. We’ve cleaned the showerhead by wiping the surface with a shower cleaner, which has kept it as good as new. Most domestic bathroom extractors attach to a 100mm hole in the outside wall. If you’re replacing a standard-sized extractor fan, this hole will already be present and you should be able to install the new one yourself. Before you remove the old fan, it’s a good idea to take a photo of its wiring for later reference – and make absolutely sure you shut off the mains power before you take the old one’s front housing off. Three months in, the SparkPod Shower Head looks and functions as well as it did during our initial round of testing. The water pressure is still just as impressive, and because of the dark bronze color we opted to try, the minimal water spots that have appeared are barely noticeable. At this point, the nozzles don’t have much grime or clogs at all. You can choose from handheld models that can be hung up neatly in the shower, or a standard fixed one that is either attached to an arm or the wall.
The extent of the zones in a bath or shower room can be limited by floors, ceilings and walls. For more detailed information see BS 7671 diagrams 701.1 & 701.2. Any electrical equipment installed on the surface of floors, ceilings and walls that limit a zone is subject to the requirements of that zone. After researching the most beloved, top-rated showerheads currently on the market, we gathered 20 options and took them home with us. In this initial testing, we installed the showerheads as per the manufacturer’s instructions, used the showerhead consistently throughout the testing period, and cleaned the showerhead after two weeks of use.Zone 1 for a bathroom is the same width as zone 0 (the width of the bath) extending to 2.25m above the finished floor level. In a survey carried out by ventilation specialist Vent-Axia, 40% of respondents said that they or their children had been woken in the night by a noisy bathroom fan. Even the cheapest fans are usually very quiet out of the box, but as the motor bearings start to wear – typically after about two years with low-end models – the blades can start to oscillate against the main housing, producing an annoying rattle in the process. A higher-quality fan should last longer, but if you value quietness then at some point you’ll probably need to repair or replace your fan. How do you install a bathroom extractor fan?
Great Deal 
New Comment