Laser 2611 Torque Angle Gauge 65mm 1/2"D

Product Information

Electronic torque wrenches: These are one of the most common digital torque angle gauges. They are digital torque wrenches that measure both torque and angle. You just have to set the desired torque or angle, depending on what you want to do, and you will read the value on the display in real time. Something to be aware of in torque and angle tightening is that you cannot change the bolt type to a bolt with a different thread pitch as it would invalidate the angle required. The method is relevant to every fastener type though, so engineers need to keep re-evaluating in every situation to determine the best torque-angle combination. It’s very important that maintenance engineers understand this relationship. Torque combined with angle tightening methods can reduce the uncertainty in the tightening process by reducing the reliance on torque control alone. For every 360-degree rotation of the bolt, the nut advances down the thread by a fixed number of millimetres on a given bolt. This is referred to as the thread pitch. If you bed the assembly together using a low torque value, every degree of rotation after this will be used to stretch the bolt. This almost eliminates the effect that variations in friction have on the tightening process compared with torque control used on its own.

The torque-angle method is used when user manual specify the precise value, and that’s why these tools complement each other so well. It’s as simple as torquing the fastener and then setting the angle, so there’s no competition about which one is better; both tools are necessary to work with precision parts. Using a torque angle gauge can bring several benefits to your tightening process. Here are some reasons why you may want to use this tool: 1. Accurate Readings: Buying a new digital torque angle meter to work on your vehicle may seem like a straightforward decision, but, in reality, it is hard to always nail it. Let’s take a look at some of the things you should consider before purchasing a new torque angle gauge digital. Accuracy of the Torque Angle Gauge First, we need to clear up a common misconception before going forward. While many torque-to-yield fasteners used by OEMs call for a torque angle measurement, the process isn’t specific to a T-T-Y fastener. It is, however, an amazingly accurate way to stretch a bolt a specific amount, which is absolutely critical in a torque-to-yield fastener.Torque coupled with angle tightening approaches will minimize tightening process instability by minimizing dependency on torque control alone. On a given bolt, the nut progresses down the thread by a set amount of millimeters on any 360-degree revolution of the bolt. This is known as the thread pitch. These fasteners are torqued over the fastener’s material yield point. This means that these fasteners are torqued to the verge of suffering plastic deformation (damage) as they are tightened, reaching their highest clamping force, which has been proven to be the best way to achieve stability in applications that work at high temperatures or endure extreme temperature changes, like cylinder heads, for example. As TTY are torqued to a point where they become stretched permanently, these fasteners can’t be reused since re-tensioning them is unpredictable and unreliable as they are on the limit from suffering permanent damage. The torque-angle method is the best way to torque these fasteners; however, it’s incorrect to assume that all fasteners with torque-angle torque specs are of the TTY type. Do I need a Torque Angle Gauge? Common Applications

This tool is essential for applications and fasteners that must be torqued using the torque and angle or TTY (Torque To Yield) method. In this article, I will tell you all you need to know about this tool. Overall, using a torque angle gauge can lead to better tightening results and improved safety. Be sure to follow the manufacturer’s instructions and proper precautions while using this tool. What is the Relationship Between Torque and Angle? Some digital torque wrenches measure torque and angle; however, the most common type of torque angle gauges don’t measure torque, they only measure the angle, and they are used after you have torqued the fastener using a torque wrench.Tighten the fastener until it’s torqued. Depending on the tool, you will hear a beep or see a light flash when you have reached the desired torque. Digital torque-angle adapter: They work as mechanical torque angle gauges, just that the angle is read on a digital screen, and they have some cool features like you can set them to beep to alert you that you have reached the desired angle. To begin, use the torque wrench to apply a small amount of initial torque to the bolt to seat it. After that, rotate the bolt a certain amount of times. Now, the maker may be very certain that the right stretch is being applied to the bolt. What is a Torque Plus Angle specification?