SKmoon Damaged Screw Remover and Extractor Set , Made From H.S.S. 4341#, the Hardness Is 62-63hrc ( Set of 4 )

Product Information

TOP TIP: TAKE CAUTION AND USE PROTECTIVE EQUIPMENT WHEN WORKING WITH CHEMICALS. NEVER MIX CHEMICALS. Other methods

If you are using a power tool for added gripping power, attach the drill to the protruding end of the extractor and power the drill with a reverse rotation The most successful and easiest way to remove a screw is to use a screw remover, like these. They can be used for screws with broken heads or with stripped threads. Once you have a screw remover, it can be used as many times as needed, so it’s a really useful bit of kit to have.Screw removers work by punching a hole in the top of the broken screw. They feature reversed threads, which allow them to hold onto the screw so that it can be twisted out of the cavity. All you have to do is place a rubber band over the screw and try to unscrew it as you normally would. The rubber band supplies increased grip to the screwdriver, making it easier to remove the screw. Use a different size screwdriver You’re most likely to find broken or stripped screws on items that go through a lot of daily wear and tear, like door hinges. However, it’s not unlikely to find the odd broken screw in newer installations too. You should be aware that each different method is dependent on what material the screw is fixed into – some materials like plastics and softwoods can be damaged if they undergo a lot of stress.

We all know how frustrating it is to come across a broken screw. To the uninitiated, removing broken screws can be a very difficult task – but with our handy guide and a bit of patience, you’ll be able to extract your broken screws in no time! Don’t try to force the screw out of place, as this can cause further damage to the screw head and make it even more difficult to remove. Rusted screw? Try a chemical reaction

How to remove a screw using a screw extractor

Screws can break, rust, or become stripped and need to be replaced. This brings any work or project to a halt. The easiest way to remove the screws before replacing with a new one, is to use a specialist tool such as a screw extractor. The screw extractors are similar to a screw but have a reverse thread.