About this deal
Allow a small mist of repositionable 3M sprays mount adhesive to dry on the back of the stencil for about 30 seconds, or until the stencil becomes tacky.
EXPOSE - Expose your printed image onto the Ikonart Stencil Film using the exposure stand and UV LED light that come in the kit. Move your way over the stencil in a deliberate manner, achieving even coverage (literally keep pressing the cap in and out for less than a second each time) Another approach is to build up the paint by brushing the paint can back and forth over the stencil, spraying in lines back and forth. Your stencil is made from reusable polyester or polypropylene which is suitable for use with many different paints on most surface areas including; wood, stone, concrete, mono-block and metal.Mylar is a type of polyester film that is thin, flexible, and transparent, making it an excellent material for stenciling. To clear the nozzle after using the spray paint, turn the can upside down and spray until only clear gas is emitted.
There's no way we could have done it without your tireless efforts; we're so appreciative of your proactive attitude and incredible hard work you put in to make our Christmas campaign a success. Just leave this blank or enter in an estimate in the Special Instructions box and we'll help you get the perfect custom stencil. Test sprays on a scrap of cardboard to ensure the can is spraying properly and to get a feel for the can and the distance needed to spray from. If you keep it rolled in a tube, the edges will curl when you unroll it, and you’ll have to spend time flattening it out.Made from 4mm Fluted Polypropylene, these stencils enable you to paint a message or design on an exterior surface with ease. The Preview of the design is pixelated and difficult to see, thus resulting in a poorly designed stencil.