276°
Posted 20 hours ago

Dremel 566 Tile Cutting Kit, Accessory Set with Cutting Guide and Spiral Cutting Bit for Precision Cuts in Wall Tiles

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Cleaning Up: After you’ve finished cutting, remember to clean your Dremel thoroughly with a shop vac. Tile cutting can leave dust and tiny fragments that may affect the performance of your Dremel tool over time. Ensuring personal safety is extremely important during the process, and after cutting the tile edges should be smoothed with a grinding attachment. You are now ready to attach the diamond cutting wheel. The diamonds make the wheel hard enough to either edge or plunge cut into the tile with relative ease. Another benefit is that the wheel is thin enough that you are not removing that much material with each cut. Set aside enough time to make the cuts that you want, and then start one at a time with each tile. If you work efficiently, you can make a considerable number of cuts in a relatively short amount of time using the Dremel. 1. Selecting & Marking Tiles: Use Plunge Cuts to create holes for electrical outlets on wall tiles. Using a Right Angle Attachment makes this task easier.

You must your safety gear during this process as well, because grinding can produce small particles that may harm your eyes or respiratory system. Straight Edge Guide: If you’re making a long straight cut, consider getting an accessory such as the line and circle cutter. Safety is paramount when working with power tools such as a Dremel, particularly when cutting hard materials like tiles. There will be a lot of fine dust particles generated when you cut the tile and spinning wheel could potentially send small fragments flying, so be sure that your safety gear is on properly. A higher speed – generally around 20,000 to 25,000 (RPM) – provides a cleaner, more efficient cut. This is because the faster spinning action of the diamond wheel at high speed more effectively grinds through the hard tile material. Keep it Cool: Place a small container of water nearby to dip your cutting wheel in periodically. This helps prevent overheating, extends the life of your cutting wheel, and reduces dust.

Customer reviews

The process of cutting tiles with a Dremel requires careful preparation, setting the correct tool speed, and proper cooling of the cutting wheel to prevent overheating.

You can raise the RPMs even higher, but the tool will create a high-pitched noise that may be distracting. If you have ear protection, you may want to set it higher, but 20000 RPMs is generally good enough for ceramic tile. However, feel free to experiment with scrap tile to find the speed that works best for you. 5. Put On the Safety Gear A Dremel is quite versatile, and yes, it can cut tile as well. But you should use the correct type of blade to make the cut. Most importantly, you must use a diamond wheel when cutting tile. Ceramic and porcelain tiles are hard and diamond being harder than them will cut through the material. Keep in mind that the cutting process will be slow compared to wet tile saw or tile cutter, so be patient. By taking the time to smooth your edges, you not only make your tiles safer to handle but also give them a more professional, finished appearance. The higher the revolutions per minute (RPM), the better the quality of the cut will be. The speed at which your Dremel tool spins its cutting wheel has a significant impact on the quality of your cut.

Similar products

Ceramic tile is one of the more difficult materials to cut. While hard, it is also fragile, which means that using the wrong tool may result in splitting or shattering the tile. This leads to the question of whether you can use a Dremel to cut tile. Can a Dremel Cut Tiles? Key Takeaways Now that you have made the lines, the next step is securing the tile to the bench. It is recommended that you use rubber clamps as they can hold the tile firmly without marking or breaking the tile itself. If you do not have rubber clamps, place some tissue between the tile and clamp so that no marks are made.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment