Rycal Block Paving and Concrete Sealer 20Ltr

Product Information

In the unlikely event you receive goods that are damaged, the courier note must be signed DAMAGED for M. SmartSeal Block Paving Sealer has been developed to combat the constant problems of staining and weed growth and to enhance the colour and aesthetic appeal of new or mature block paving or flagstones.

Paintmaster Block paving sealer is an air-drying, solvent-borne, Polyurethane resin-based sealer which provides a durable sealer coat with a semi-gloss eggshell finish. They are a popular choice when sealing pattern imprinted concrete but if your paving or concrete is old you may want to refresh the surface and apply a coloured paving sealer.The use of a squeegee during application will force the sealer deep into the sand between the blocks creating long term joint stability. Applied with roller and found a deep pile masonry roller was best to put down enough sealer to cover properly as per the manufacturer's videos.

Multicrete Block Paving Sealer is a high quality acrylic solvent based clear sealer, designed to enhance and protect block paved areas by repelling water, dirt, oil and fuel. Thinners aren't required with this product, use white spirits or a proprietary brush clear for cleaning. If you just want to protect the block paving on your driveway from oil stains and loss of colour, plus generally keeping it looking nice and easy to maintain, then the sealer can be applied at a ratio of around 4 m2 per litre.

All forms of Smartseal block paving sealant will set jointing sand rock solid, but if the joints have not been cleaned thoroughly, the sealer will not be able to work correctly. Block paving Eco Seal can be applied and is dry within a few hours – allow the product to fully cure over the next 24 hours in dry weather.

Smartseal sealers are designed to help minimise maintenance for the homeowner but as with all paving products, some degree of routine maintenance is necessary to prevent build-up of moss, weeds, stains or algae growth.Wear protective gloves, mask, googles, boots and suitable clothing at all times, We recommend applying 2 coats of sealer for a maximum protection. The results were more than I expected, there was a mixture of new and old patio slabs and K-Seal provided a uniform final finish to them all. When preparing block paving prior to sealing it is important that not only is the surface of the pavers clean, but vital that the joints have been cleaned properly.

If you require a even glossier finish, if further coats are applied, the paved surface will become shinier and shinier.

Polyurethane sealers for block paving sealers were developed so that large areas of commercial paving could be cleaned by industrial cleaning equipment without the sanded joints being disturbed. Then once the sealer has been applied the solvent will evaporate leaving behind the resins on the surface of the paving.