Cramer CRA 40407 EN Grouting & Silicone Profiling Kit 7

Product Information

The only way to get a professional finish with silicone is to use this kit, forget 'wetted' fingers, masking tape and all the other rubbish that people have told you, this kit, if used correctly, will give a finish that only professional can obtain, without the mess which is normally associated with silicone. As an inexperienced diyer using this kit was relatively easy. You can achieve amazing results but if you've never been good with silicone sealant I recommend you watch a couple of you tube clips of a guy using this exact profiling tool. He explains everything and shows exactly what you should or shouldn't do. I found it invaluable. Finally, a tool to get behind the very tight fitting taps would have been the icing on the cake. It's amazing how customers notice the quality of the sealant finish before they notice anything else. Extremely competitively priced at Plumbworld. A must have for a very professional finish. Various profiles and sizes. Results were remarkable! I bought this after seeing Charlie DIYte raving about it on his YouTube video. I already have a Fugenboy tool which is similar to this that I was pleased with that but could see the extra advantages of this Cramer tool set whilst watching the video. The guide to span the tile grout lines is particularly useful.

I've always used a wet finger to finish off the profile and wasted lots of sealant and paper towel. The Cramer Profiling kit works really well, it provides a very even smooth finish and allows you to patch over areas while the sealant is wet. I wish I'd bought a set years ago. It cleans off excess sealant from tiles and floor and the tools wipe off easily with newspaper and final rub with paper towel. The only thing that I would caution against is using the saw tooth tool to remove old silicone because if, like me, you are not in complete control of it you can scratch other surfaces very easily. I resorted to using a sharp wood chisel to remove the rest of the old silicone. I'd highly recommend this product, especially for all DIY sealant jobs around the home. Easily cleaned. Reduces silicone waste too. Really no mess...and hassle free to use. Handy box to keep profile tools clean, accessible and damage free! The Original – Cramer Profiling Tools – made in Germany. Fugi 7 Professional Tool Kit for removal and renewing joints, the Profiling Kit with 11 Pieces including tool box Removal of old grouts: The Profiling-Kit 7 contains a practical silicone removal tool with 3 changeable metal blades: A saw blade for easy removal of old silicone joints and a scraper blade with replacement blade for removal of residues.As bathroom fitters, we do alot of siliconing. The standard of our installations is high and our customers expect a very high standard in our finishing....Using the fugi makes any silicone job neat and easy. It is very useful for difficult areas as the silicone can be neatly wiped away leaving a neat and tidy seal and finish. Once you use this product you will never use anything else for sealing.. One of my friends is a double glazier of 20 years and even he was surprised how easy Fui's are to use and the qualtiy of the finish! Simple grouting: 5 profiling tools with 16 profile variants and 2 guides. The cleverly attached guides help bridging intersections and prevent any subsidence when working at these intersections. All cutting edges at 90° angle! The profiling tool therefore does not have to be tilted in corners and guarantees that no residual material remains above and below the joints when pulling off – even the corners are properly grouted. The most complex jointing works become a child’s play.