MYSON Radiator Bleed Valve/Screw/Vent/Nipple Replacement

Product Information

You will want to take your new plugs and wrap the PTFE tape around the threads, pressing the tape into the grooves as you go. How many times you wrap the thread will depend on the valve, but 3 times around is a good benchmark. If you have had to remove the bleed plug for any reason, you may be struggling to get a good and watertight seal. Now you will need your adjustable spanner to remove the bleed plug (and the blank on the other end). Our unique range of TRVs includes TRV2, including a Petite version, remote sensor heads, TRV bodies, an attractive decorative model, as well a specially designed TRV kits to complement our LST radiator range.

Note: If you were unable to open the bleed valve in step 3 – undo the plug slowly and be prepared for some water to escape. Step 5 – Wrap Your New Plugs with PTFE Tape Bleed plugs can often be removed when a system needs draining or the radiator needs flushing and may be due to age, wear and tear or poor technique, you may end up struggling. How to Replace Radiator Bleed Valves I'd be a little wary of relying on the outside nut long term in case of leaks developing. Most of my radiators need bleeding at this time of year, a couple of them more than once, so that might mean a few openings. New ones often have an o-ring seal which can tolerate opening, but older ones didn't. Make sure that you turn the heating off – the last thing you want is a trip to the hospital for scalding yourself!” Frequently Asked Questions First, we need to turn off the heating system and let it cool. Inevitably there will be some water escaping when you replace the bleed valve, so it is best to make sure that the water is cold enough to touch. Step 2 – Isolate the Radiator in Question

Introduction to Thermostatic Radiator Valves

The time to fix is either now or after this winter but before next winter. I'd go for the latter because I'd fit it in with work that's likely anyway then. Our TRV valves are perfect for any project, whether it’s new-build, self-build, social housing or large commercial projects, MYSON have the optimum productto complement our heat emitter range Now you will need to clean around openings, insert the plugs and do them up nice and tight letting the PTFE tape create the seal. Step 6 – Turn on the System

We can provide dedicated support for the commercial and specification market in areas such as hotels, schools, hospitals and a variety of other commercial installations Our DECORATIVE range includes 8 different products with compression or push fit connections in 10mm and 15mm sizes Keep the valve open until the water stops flowing out although if you are unable to open the bleed valve, move on to step 4. Step 4 – Remove the Bleed Plug As you can see, this is not a difficult task and no need for panic stations. The best thing to do is keep calm and carry on. The article above is aimed at replacing standard bleed valves located on most radiators.Another reason could be because the bleed valve has been painted over and doesn’t look very good and you want to have nice shiny fittings on your radiators. TRVs are one of the most efficient ways of controlling the heat in your home and by installing TRVs you could save up to 40% on heating bills, as independently tested by the University of Salford.When set at the correct level they will keep the room at the desired temperature.As they are installed on each radiator, you can have different settings in each room and they can be turned off in rooms that aren’t been used. MYSON Controls produce a wide range of thermostatic radiator valves (TRVs) to suit any application, from standard domestic requirements to polished decorative products.

There are a number of reasons why you need or want to replace your bleed valve but don’t worry, it is not a difficult task so keep reading and we will cover that shortly. Leaks

Registration for our free email newsletter.

Our PETITE range has over 10 different products with compression or push fit connections in 10mm, 15mm and ½” sizes A leaking bleed valve can cause havoc in the pressurised system and will need rectifying sooner rather than later. You could try removing the bleed plug and attempting to reseal but, in most cases, it is best to just buy a new one. Aesthetics This step is important to prevent leakage as new plugs alone will not be enough to prevent leakage so the threads will need to be wrapped with PTFE Tape. This is especially true when using new plugs on older radiators. One of the most common reasons for replacing a bleed valve is that the bleed valve has failed and is leaking.