ADASPR Thermal Insulated Doorway Curtain Heavy Duty Soundproof PU Door Curtains Windproof Blanket Garage Screen Door Covering for Single Sliding Front Door Patio Bedroom 70-150cm Wide

Product Information

Warranties of 2 years electrical, 5 years tubular motors, 6 years mechanical and 10 years paint finish apply to all Gliderol doors (except Mini Roller As well as providing cushioning for the roller door against the floor of the garage, the rubber seal plays an important part in the operation of the safety system. There is also a courtesy light which illuminates whenever the door is in operation and remains on for a few minutes afterwards – which is especially helpful if you don’t have lighting in your garage. The inside insulation is a poly fiber insulation that does not use fiberglass. The material is wedged inside of the skins and stitched in place so that it will not settle towards the bottom. The insulated thermal garage curtains get their insulating properties from the air space that this batting creates.

The manufacturer strongly recommends that all Gliderol products be serviced by an authorised Gliderol Distributor or Gliderol Technician every 12 months to ensure longevity of the products’ life. Failure to do this may result in any warranty being invalid.Clear includes 20 mil, 40 mil, and 40 mil USDA-grade. They are perfect for creating see-through panels for greater visibility. Such curtain doors will allow sunlight to pass through, but will remain strong against wind, rain, and harsh temperatures. We find R3 is a good fit for most applications. You really should take into consideration the map above and the length of time that you are going to be using the thermal industrial curtains. The longer you will need them along with the colder your location is will result in us recommending the higher R6 material. These Gliderolrollerdoors come with a bottom weatherseal as standard to prevent leaves and other materials entering your garage. The insulation value of a thermal insulated curtain wall is measured by what is called an R value. In basic terms, R value is the capacity of an insulating material to resist heat flow. The higher the R-value, the greater the insulating power. AKON Provides R3 and R6 insulated industrial curtains. The map below shows insulation R-Value recommendations from the U.S. Department of Energy for various regions as a point of reference. Sufficiently large sizes require the Dual Motor as they exceed the specified weight load of the Heavy Duty Motor:

service to the customer but without any legal obligation to do so, assist customer to obtain redress in respect of any defect.v) Any defect (including defects in component parts or accessories) rising from or attributable to the failure to carry out normal preventive maintenance or adjustment. The average curtain roll size is around 300mm-350mm in diameter, although this may be larger depending on the installation position and the material chosen for the curtain. We offer special models with a compact design using either smaller slats or patented variable size slats. We cna offer you a dor with a headroom requiremnt of only 165mm x 165mm!!

Domestic/Residential use - 10 years corrosion free on door panel excludes paint surface rubbing or fading. (Mini Roller door has 1 year total warranty cover). Garage doors should be inspected upon installation and viewed in natural daylight (not direct sunlight) from a standard distance of 3 metres to view their overall appearance. From this distance the door panel should appear free from visible marks or distortion, stains, blemishes, indentations or scuffs. Quiet Operation - Noise is reduced as the motor is housed entirely within the roll of the door giving a quiet and smooth performance. Safety:The roller door will reverse automatically if the downward movement of the dooris restricted. Opaque includes 13oz, 18oz, and 22oz vinyl. This material is common in both industrial and residential use. It is durable, easy to clean, andFor operating the door without the transmitter, this is an easy item to install and set up. Simply screw to the wall nearby and set up the coding to operate the roller door using a 4 digit code chosen by yourself, which can be easily changed whenever required. If you have more than one door fitted e.g. two or three single bay garage doors, you will be supplied with a separate control panel for each door and separate remotes – it’s also possible to have multi channel remotes so that you can operate more than one door with one remote control – more about that below in the section below.