Crowfoot Crowfeet Wrench Set Large Crows Feet Metric Sizes 27-50mm 1/2" dr TE191

Product Information

The crowsfoot wrench set comes in two sizes, at slightly different prices of course. The first one that we have described above, whose sizes start at 1 inch to 1 7/16 inches and the SAE 1 5/8 to 2 ¼ inches. If you have to fasten really large bolts in squeezed spaces, it would be much better to get the two sets.

A: The difference is in the convenience when you are tightening the fasteners in the hard-to-access spaces. Because of their nimble sizes, they will fit in small spaces where regular torque wrenches would not fit.This 15-piece set has pretty much anything that you might need for the daily tasks in your workshop or garage. But the versatility does not stop with the crow foot wrenches that come in sizes of 8mm all the way to 24mm, skipping just 20mm and 23mm. They also come with two drives – 3/8-inch and ½-inch drives. A: When you use a high-quality crows foot wrench with a torque wrench, it means you have added an extension and therefore the torque value will be affected. In fact, what happens is that you have gained some leverage depending on the inches added on the extension. Thus, you should adjust the torque value on the downside, that is, reduce by a couple of ft-pounds or so, depending on your calculations. While this set does not come with as many pieces as most others which mostly start from ten onwards, still, the pieces included are some of the most commonly used. These sizes are in SAE inches and numbers and they are as follows: 97744 1 ½ inch, 97769 1 3/8 inch, 97740 1 ¼ inch, 97738 1 3/16 inch, 97736 1 1/8 inch, 97734 1 1/16 inch and 7732 1 inch. That should pretty much cover everything you might need to tighten small, medium and even large fasteners. In your career or hobby, there will be those times when the regular torque wrench will not just work, requiring a niftier option. With the versatility that you will get from this set and the 1/2-inch and 3/8-inch crow foot wrench drives, you will reach the tight and even the angled spaces to tighten your fasteners. Pros

Their slim design does not affect their quality at all. They will still do what they are supposed to do and last a long time. The sizes of the wrenches are etched on the body. Made of heat treated drop forged steel, these are pieces will last a long time. Again, the choice of this material makes them quite strong, yet slim in design. The chrome plated finishing also makes them easy to recognize even in poorly lit spaces. Using inches for measurements, the numbers are indicated clearly on the body of the wrenches. Size starts at 1 1/16 inch, 1 1/8 inch, 1 3/16 inch, 1 ¼ inch, 1 5/16 inch, 1 3/8 inch, 1 7/16 inch, 1 ½ inch, 1 5/8 inch, 1 11/16 inch, 1 ¾ inch, 1 7/8 inch and the last one is a 2-inch. Similar to the other Sunex Wrench sets that we have reviewed here, even for this one, durability is assured. It is made of high quality, drop forged and heat treated Molybdenum Chrome. Let us just say that with vigorous use, these things can last a lifetime. Pros The wrench drive is 3/8 inch. It can be used with ratchets, extension rods and torque wrenches. It will extend your reach to access the fasteners in the squeezed spaces. Some of the areas that you can use crow feet wrenches include radiator area, control arms, faucet hoses and others. Pros

\n\t\t\tLaser Crows Foot Wrench Set 3/8\"D 10pc

The heads should fit nicely on the fasteners without slipping, or without feeling too small. They should be JUST RIGHT, no room for error. That way, when they are combined with the best ratchet wrench with ergonomic handle, you can tighten your fasteners faster. The Price You will get great value for your money from these crow foot wrench torques. They are made of Chrome Molybdenum steel, drop forged, which is rust-resistant and will not break even when dropped onto a hard surface from a height.